Hello! Log in or Register   |  Help  |  Donate  |  Buy Shirts  See all banner ads | Advertise on TheSamba.com  
TheSamba.com
 
Classifieds Index -> Vendors - New Parts -> High Performance/Engine
O-ring sealed sump plate Beta Switch to pop-up ad layout What is this? | Turn on always show all large photos     Ad id: 1099590
Photo
Additional Photos
Click to load image
L & R arrow keys scroll through photos
Photo Photo Photo
everything you get in the kit
Photo
hardware
Photo Photo
Photo Photo Photo
Photo Photo Photo
This is how they start out 3/8 6061 plate
Photo
We now have shirts see the online store for details
O-ring sealed sump plate   Price: $45.00
O-ring sealed sump plate for 1600 T1 based engines with full flow oiling without the stock filter screen.

When I designed this plate I wanted something bullet proof, I wanted a plate that would last. One of the down falls of other plates on the market is they are thin at the flange. They will take a 3/8 plate and make the counter bores deep enough to use the stock hardware resulting in a flange that is really only .075 thick. They do this so they donít have to include hardware therefore keeping their cost down. Now common sense tells you that if a steel plate with a flange of .075 will not hold up how will an aluminum one? It wonít. My plate is .250 thick at the flange it will not deform from years repetitive use. Because my plate is so thick at the flange you will need to extend your studs or replace them with the supplied studs. My plate also does not suffer from the teeter-totter syndrome when the engine is on the floor or bench it sits nice and flat on the acorn nuts, no scratched plate, no teeter-totter engine.


Features:
Made in the USA
This is a kit with high quality hardware included.
Sealed with Viton O-rings.
Three pages of detailed instructions, we donít sell you a part and let you figure it out.
Extra thick flange so it is built to last.
Plug hole is 14mmx1.5 thread so you can reuse your stock plug (If you want a 3/8 NPT pipe plug we can do to that just let me know).
My sump plates come with real German made copper sealing washers not those cheapo copper plated steal washers that leak.

Originally intended for use with a deep sump but you could use it without a deep sump if you change the studs in your case. Also this plate is not going to seal to a sump/case that has a pitted sealing surface.

***Please note that you canít use the stock filter screen with this sump plate.***

*****Does not fit CB sumps or EMPI China knock off of CB sumps*****


****Shipping cost is $6.00 via USPS Priority mail****

Payment methods:

Online store WWW.JBEVWSTORE.COM

Paypal payments can be sent to SALES at JBEVW.COM (just put a @ in there)


Money Orders are gladly accepted contact me for my mailing address.


For more info, better pictures, more products etc check out my website WWW.JBEVW.COM

***No local pickups***

California residents must pay 8.00% sales tax so your total in California is $54.60 with tax and shipping
Advertiser information Ad information
Advertiser:
Phone:
Member since:
Joe Bence Premium Membership
858-775-2169
March 14, 2004
Email this Advertiser
Email this Advertiser
Location: 
Ad placed: 
Ad updated: 
Views: 
Category: 
Payments accepted: 
San Diego, California, USA Map it
Tue Feb 22, 2011 5:18 pm
Sun Aug 17, 2014 1:20 pm
14092
Vendors - New Parts - High Performance/Engine
Paypal
Money order/Bank check


View other ads Search for Feedback Watch this ad | Report this Ad
Watch this seller Share: Email Facebook Twitter
Other ads from Joe Bence
See all | See ads in this category
Quick release pins for Bug decklids
Quick release pins for Bug decklids
JBE fuel pump block offs
JBE fuel pump block offs
Alternator strap clamp
Alternator strap clamp
Got a bug with a 4 bolt hood latch?
Got a bug with a 4 bolt hood latch?
Throttle tube kit
Throttle tube kit

About | Help | Advertise | Donate | Premium Membership | Privacy/Terms of Use | Contact Us | Site Map
Copyright © 1996-2014, Everett Barnes. All Rights Reserved.
Not affiliated with or sponsored by Volkswagen of America | Forum powered by phpBB