|
"You Build" complete engine kits! Price: $2199
|
100% new, no used parts at all!
Why try to call all around to get this part from here and that part from there
when we can supply you with all the best parts, all in one shop!
Name brand parts from: Bugpack, Scat, LowBugget, Mahle,Empi, Engle, Web Cams, Auto Linea, Bosch, Schadek, Manley, DPR,CB,Rimco, Manton, and more!
You can pick what size and style of motor to build or we can help, just give us a call at the "shop" 714-639-4284
1x 69mm or 78mm or 82mm VW Journal crank.
Crankshafts have been tested and proven to excel in engines at over 8500 RPM.
The premium 4340 aircraft quality steel with vacuum degassed forging process creates a clean
and pure crankshaft. The state-of-the-art CNC machine centers provide superior tolerance.
4340 crankshafts incorporate these features:
- Computer designed counterweight to reduce main bearing loads.
- CNC machined to provide superior tolerance and journals micro polished to 5 RMS.
- Generous 0.125" journal radis to disperse stress under high loads.
- Each crankshaft has been visually inspected, X-rayed, magnafluxed, and ultrasonic tested to ensure
perfection.
- All cranks have heavier counter weights, this makes it easy for counter balancing.
All the cranks are forged billet 4340 chromoly (not 4130 like the others)
Cross drilled oil holes for extra oiling and cleaning.
Extra long 8 dowel pins 8mm size.
And yes all the cranks are Nitrided!
1x "Real" Chromoly 4130 balanced Flywheel
12.5lbs forged steel 1-piece 8 dowl 200mm.
You can replace with stock weight German 8 dowl flywheel for no extra charge.
1x Chromoly Gland nut.
Yes you can and should take this nut to over 400lbs of torque! (we set them at just over 550lbs tq)
1x set of forged CB "I" beam rods 5.400" VW Journal"
*ARP 8740 bolts,*4140 Chromoly, *Heat Treated,*Stress Relived,*Shot Peened,* Magna Fluxed and
honed. these chromoly connecting rods have radiused end caps to help reduce the amount of clearancing!
1x · Aluminum Super cases with raised roof!
. Pentroof design reinforced top of case
· Clearanced for 86mm crankshaft-No hand clearancing
· Reinforced solid behind #3 cylinder
· Deep #3 stud and increased material around stud inserts.
· Drilled and tapped for full flow oil filter
· Main oil gallery drilled and tapped for easy clean out
· Shuffle pins installed on center main saddles
· Custom ported case interior with enlarged openings
· Available with 8mm or 10mm case savers or UNDRILLED
· Your choice of bores - 85.5mm, 90.5/92mm or 94mm
1x complete new set of Std/Std Mahle Main, Rod and Cam bearings.
1x Engle cam shaft. You pick the cam you want or we can help you.
for 78mm and larger cranks you will need to have the cam clearnced. add$45 to the base price of the kit!
For one of LowBuggets Made in the USA LBC turbo cams that are pre-clearnced add $45 to the base price of the kit!
1x complete set of Made in the USA LBC Solid Billet Racing Lifters.
1x pr 1.4 or 1.25 Pro Rockers with adjusters.
Solid bolt shafts, set of 1.25 or 1.4 rockers, Chromoly rocker studs and HD adjuster nuts, HD nylock locking nuts, HD racing lash caps complete set.
1x Straight-cut cam gears steel on steel.
1x Complete set of Mahle/Cima, Graphite Coated Piston and Cylinders.
We balance/match there weight.
Any size 90.5, 92 or 94mm, A or B
4X barrels, 1x complete set of proformance rings, and 4x ristpins.
1x set of copper head gaskets .04" or .06" thick for 90.5 or 94mm.
1x complete German gaskit kit with a rear main seal .
1x 26 or 30mm HD Shadek oil pump.
1x Aluminum pump cover with full flow .
Complete set of crank bearing dowls
1x cam plug
1x 1 1/2 qt oil sump with chrome cover plate and drain plug!
1x complete Engine Hardware kit.
1x performance oil psi plunger kit with springs.
2x alen screw plugs for oil psi plungers. Easy to install!
1x Complete set of Chromoly HD push rods
1x Set of LowBugget racing spring loaded push rod tubes.
1x Chromoly head studs 8mm or 10mm
------------------------------------------------
$2199 for the complete kit!
Now you have a complete long block only missing heads.
You can add your own heads or add some of our's!!!
"options"
For ARP2000 Bolts for your "I" beam rods add $65
For Racing or big power "H" beam rods with ARP2000 bolts add $125 to the base price of the kit! (5.4, 5.5, 5.6, 5.7 or 5.8")
note: if you order a 84 or 86mm crank with chevy journal you will need our "H" beam rods. Its hard to fit a "I" beam in there!
"Labor option"
If you would like us to set the rod bolt stretch and assemble the rods on the crank add $85 to the base price of the kit!
"Replace"
Mag AS41 dual oil relief engine case with: bore 90.5/92 or 94mm, stroker relievie for up to 86mm, and full flow add $175 to the base price of the kit!
"Labor option"
You can add piston oil cooler squriters Add $120 to the base price of the kit!
You can add sand seal Add $45 to the base price of the kit!
Spot face all stock 13mm .025" thick washers for 15mm .080" thick washer. includes washers. add $45 to the base price of the kit!
Shuffle Pin 2x main saddles "mag case only" add $75 to the base price of the kit!
Shuffle Pin 6x main saddles "mag case only" add $130 to the base price of the kit!
Weld up behind #3 "mag case only" $75 to the base price of the kit!
are you lost? give us a call and we can help! 714-639-4284
"Replace"
Main bearings with Kolbenschmidt bearings. add $6 to the base price of the kit!
Cam bearings with double thrust add $3 to the base price of the kit!
rod bearings with Clevite Chevy bearings. add $14 to the base price of the kit!
"Replace"
We can replace the straight cut gears with stock cam gears no extra charge.
For adjustable racing straight cut cam gears add $20 to the base price of the kit!
"Options"
For Grant performance rings add $40 to the base price of the kit!
For Total Seal sec rings add $70 to the base price of the kit!
For Total Seal complete set add $130 to the base price of the kit!
light weight rist pins (- 20 grams) add $45 to the base price of the kit!
"Labor Options"
Gas port pistons add $125 to the base price of the kit!
Ceramic coat tops of pistons add $135 to the base price of the kit!
Piston notching add $125 to the base price of the kit!
Slip-in 94mm to fit into 90.5 bore for more meat around head studs add $60 to the base price of the kit!
94mm long barrels for 86mm combos add $165 to the base price of the kit!
are you lost? give us a call and we can help! 714-639-4284
"Options"
"O" -Ring the oil pump add $25 to the base price of the kit! (should with aluminum case)
"Options"
Replace the aluminum cover for Steel pump cover with full flow add $8 to the base price of the kit!
O-Ring aluminum pump cover add $20 to the base price of the kit!
"Options"
replace std drain plug with magnetic drain plug add $2 to the base price of the kit!
Billet drain plate add $12 to the base price of the kit!
3.5 qt super sump add $65 to the base price of the kit!
ADD ON'S
"REPLACE"
Replace the std pushrods in the kit with real Manton 3/8" .058" 4140 chromoly Racing push rods add $69.99
Replace std head studs with Bugpack Racing head studs 8 or 10mm add $179.99
NEED SOME HEADS TO ADD TO YOUR ORDER?
"HP Stock" heads come with these features:
* Dual Port type 1 head
* 040 GO1 Auto Linea VW castings.
* Fits without modifications to your stock sheet metal.
* Added material under each rocker stud blocks.
* 3 angle long last, high flow valve job. (most all heads off the shelf come with a single angle valve job)
* Single High-Rev performance long last valve springs for that extra rpm protection.
* Hardened heat treated valve keepers. (stronger than stock keepers).
* Aluminum-Silicone-Bronze long last valve guides.
* Bore open for 85.5, 87, 88, 90.5, 92 or 94mm free!!
* with stock size chambers.
* Oiled and assembled for true bolt-on out of the box set of heads!
$399pr complete.
"HP Big Valve" Heads come with these features:
* Dual Port type 1 head
* Performance 041 GO3 Auto Linea VW castings.
* Fits without modifications to your stock sheet metal.
* 3/4" reach 12mm spark plug holes moved up and over to give more meat so there is no chance of cracks.
* Thick solid chamber blocks to dissipate heat and if you want to fly cut the chambers a lot, its no problem.
* Solid rocker blocks so you can't pull out the rocker studs like the old days.
* Racer 3 angle long last, high flow valve job. (No cheep single angle valve job with our heads)
* Stainless Steel 40mm intake valve x 35.5mm exhaust valves
* Dual High-Rev performance long last valve springs for that extra rpm protection.
* Light weight chromoly 4130 spring retainers (stronger than stock stamp steel retainers)
* Hardened heat treated valve keepers. (stronger than stock keepers).
* Aluminum-Silicone-Bronze long last valve guides.
* Bore open for 85.5, 87, 88, 90.5, 92 or 94mm free!!
* with 57cc chambers.
* Each valve spring is shimmed per your cam and rocker combo for the correct spring pressure.
* Oiled and assembled for true bolt-on out of the box set of heads!
$459.99 pr complete.
"Turbo-Prep" Heads come with these features:
* Dual Port type 1 head
* 041 GO3 Auto Linea VW castings.
* Fits without modifications to your stock sheet metal.
* 3/4" reach 12mm spark plug holes moved up and over to give more meat so there is no chance of cracks.
* Thick solid chamber blocks to disapate heat and if you want to fly cut the chambers a lot, its no problem.
* Solid rocker blocks so you can't pull out the rocker studs like the old days.
* Racer 3 angle long last, high flow valve job. (No cheep single angle valve job with our heads)
* Stainless Steel 40mm intake valve x 35.5mm exhaust valves
* Performance back-cut of the intake valves for extra intake flow and HP. (Stock or CNC heads don't have this!)
* Dual High-Rev performance long last valve springs for that extra rpm protection.
* Light weight chromoly 4130 spring retainers (stronger than stock stamp steel retainers)
* Hardened heat treated valve keepers. (stronger than stock keepers).
* Aluminum-Silicone-Bronze long last valve guides.
* Bore open for 85.5, 87, 88, 90.5, 92 or 94mm free!!
* Complete hand shaped chamber and chase cc to what your combo needs. (up to 65cc chambers if needed)
* Port off exhaust guides.!! ( on turbos the exhaust guide can get so hot that the guide can flake off and
make its way to your turbo) can you say BOOM!!
* Racer trim the intake guides for more flow and horse power!
* Each valve spring is shimmed per your cam and rocker combo for the correct spring pressure.
* Oiled and assembled for true bolt-on out of the box set of heads!
$529.99 pr complete.
" Pocket Port Heads come with these features:
* Dual Port type 1 head
* 041 GO3 Auto Linea VW castings.
* Fits without modifications to your stock sheet metal.
* 3/4" reach 12mm spark plug holes moved up and over to give more meat so there is no chance of cracks.
* Thick solid chamber blocks to dissipate heat and if you want to fly cut the chambers a lot, its no problem.
* Solid rocker blocks so you can't pull out the rocker studs like the old days.
* Racer 3 angle long last, high flow valve job. (No cheep single angle valve job with our heads)
* Performance back-cut of the intake valves for extra intake flow. Stock or CNC heads don't have this!
* Stainless Steel 40mm intake valve x 35.5mm exhaust valves
* Performance back-cut of the intake valves for extra intake flow and HP. (Stock or CNC heads don't have this!)
* Dual High-Rev performance long last valve springs for that extra rpm protection.
* Light weight chromoly 4130 spring retainers (stronger than stock stamp steel retainers)
* Hardened heat treated valve keepers. (stronger than stock keepers).
* Aluminum-Silicone-Bronze long last valve guides.
* Bore open for 85.5, 87, 88, 90.5, 92 or 94mm free!!
* Hand Pocket Port of the intake ports.
* Match Port of your manifolds to the intake pocket ports.
* complete hand shaped chamber and chase cc to what your combo needs. (up to 65cc chambers)
* Port off exhaust guides.!! ( on turbos the exhaust guide can get so hot that the guide can flake off and
make its way to your turbo) can you say BOOM!!
* Racer trim the intake guides for more flow and horse power!
* Each valve spring is shimmed per your cam and rocker combo for the correct spring pressure.
* Oiled and assembled for true bolt-on out of the box set of heads!
$579.99 pr complete.
"Options"
Full port and polish from A.J.Sims add $450
Bump up to 42x37 valves add $150
Bugpack SE Comp heads
Computer designed intake ports.
Fits without modification in any street car.
Added material around combustion chamber.
Fully machined combustion chambers.
Increased valve spring support.
Increased valve guide support.
Increased material between seats.
Long reach (3/4) spark plug bosses.
Flow increase of 70% out of the box!
No special exhaust or sheet metal needed.
Extra cooling fins over the exhaust port.
High flow along with high velocity.
Forged 1 piece Stainless Steel valves.
Accepts stock valve cover & clip.
Dual racing springs.
Chromoly retainers with hardened locks.
we will bore and cc for you.
42x37 $899.99 Titanium reatainers add $85
44x37 $929.99 Titanium reatainers add $85
46x38 with K800 springs, +.200" valves and
Manley titanium retainers and chromoly keepers $1399.99 Good for over 400hp turbo use or 200hp carb use.
Titanium Valves add $600 Pocket Port add $450 Complete port and polish add $750
bolt on or clip on deep valve covers add $35
Super Flow Heads.
The ultimate State of the Art high performance head. This designed and built from the ground up head features:
English design oval port and in a raw casting condition will flow 95%
of what a perfect 42mm dia. tube will flow on a flow bench.
Fully machined combustion chamber insures identical CCs every time.
Exhaust port design has a reshaped radius of the bend to facilitate passage of gases and still utilize after market exhaust systems.
Extra metal around the combustion chamber walls to hold proper combustion temperature and stability after flycutting even to 94mm.
Extra metal under valve seat area allows use of ultra stiff valve springs
without fear of pulling the seat.
Extra large rocker arm/valve cover area allows use of all exotic styles
of rocker arms currently used.
Inexpensive when compared to other Hand Worked racing heads.
we will bore and cc for you
92mm S/F I Heads 42 x 37.5, Pr. $1059.99
92mm S/F I Heads 44 x 37.5, Pr. $1059.99
94mm S/F I Heads 42 x 37.5, Pr. $1059.99
94mm S/F I Heads 44 x 37.5, Pr. $1059.99
94mm S/F I Heads 44 x 37.5, Pr.
No Valves $849.99
94mm S/F I Heads 48 x 38, Pr. $1099.99
94mm S/F I Heads 48 x 38, Pr.
No Valves $899.99
Titanium reatainers add $85
Titanium Valves add $600
Pocket Port add $450
Complete port and polish add $850
------------------------ BORE-----------------------------------
STROKE--83--85.5--87-----88---90----90.5---92----94---96.5-101.6
------64 1385 1470 1522 1557 1629 1647 1702 1777 1872 2075
------69 1493 1585 1641 1679 1756 1775 1835 1915 2019 2237
------74 1602 1699 1760 1800 1883 1904 1968 2054 2165 2399
------78 1688 1791 1855 1897 1985 2007 2074 2165 2282 2529
------82 1775 1883 1950 1995 2087 2110 2180 2276 2399 2659
------84 1818 1929 1997 2044 2138 2161 2234 2332 2457 2724
------86 1861 1975 2045 2092 2188 2213 2287 2387 2516 2789
------88 1905 2021 2093 2141 2239 2264 2340 2442 2574 2854
------90 2136 2067 2140 2239 2290 2315 2393 2498 2633 2920
and now you have a long block.
Give us a call at 714-639-4284 m-f 9am to 6pm and sat 10am to 3pm
We can help with all your questions!
_________________
"SHOPS" We do offer JOBBER and large order discounts.
You can order parts on our web site!
www.LowBugget.com
Need AN aluminum Fittings? Free down load PDF catalog of over 1,000 fittings for you to pick from! Fast shipping!!
Visit www.ANProFittings.com
Have tech questions? Need real help? Give us a call.
We drive, work, play and bleed VW performance!!!
Check out our other adds on The samba!!!
http://www.thesamba.com/vw/classifieds/search.php?username=A.J.Sims
www.LowBugget.com
www.VWTurboKits.com
www.ANprofittings.com
www.RacePRA.com
714-639-4284
714-639-4286 fax
mrkadron@aol.com
LowBugget.com
982 North Batavia A4,
Orange Ca 92867.
|
|
|
|
