|
|
Narrowed beams / Full Lowering Services Price: $ $ $
|
I am now offering complete lowering setups installed to your car. This is everything you need NEW plus the labor costs to install it all. Bring your car in stock, take it home lowered the correct way!
I can do anything from a mild drop all the way to laying on the ground. Any 39-79 Volkswagen, No Type 4.
All of the installed are either New or completely sandblasted and restored OE parts.
(Type 1) Beetle's, Ghia's and Type 3's Start at $1,500.
Type 2's Start at $2,500.
**These costs are you dropping your car off stock and I take care of the rest. The prices can vary if you supply your own tires, spindles and etc...*
*** Type 1 and 3 setups include the following items, Installed! ***
- All 4 New tires, Whichever sizes you prefer
- New Dropped Spindles. New Kings/Links are also included for your pre-65
- New lowered balljoints ( If you have a 66+ VW)
- Reamed/ flipped outer tie-rod ends for correct geometry
- 100% NEW narrowed Beam, Any size you prefer. ( Shock towered add $75)
- New tie-rods and ends, narrowed to match
- Adjusted and oiled steering box
- Correctly narrowed and dimpled torsion springs to match
- New Steering coupler
- New Rear torsion bar bushings
- New rear shocks
- New German transmission mounts
- Notched springplates, if preferred.
- All parts and labor included at this flat rate
-- Superbeetle's can also be done, if you purchase and supply your choice of dropped struts. ( The price will change accordingly)
**Buses**
Each Kit Includes the Following Items, Installed!
- New Narrowed Beam
- New center pin and bushing
- New Tie-rods with four new ends
- New Draglink
- Notched frame section for tie-rods ( If needed/ desired)
- Raised steering box ( If desired )
- New Shift coupler
- New shift rod bushings
- New rear torsion housing bushings
- Fresh Dropped Spindles
- New German Transmission mounts
- New Shocks
- New Tires, Your Pickings to how Low you want it
- Womack's Offset springplates
* Brake work or other additional work is extra. This flat rate covers the complete suspension only *
I can also build full, spindle to spindle beams. Complete with the new beam, new dropped spindles, tie-rods and etc to bolt in and go. Just add your brakes and steering box.
My basic spindle to spindle setups start at $950*
... That price includes
- New narrowed adjustable beam, any size you like ( Shocktowers add $75)
- New Bugpack Urethane bushings
- New narrowed Tie-rods with four new ends
- New dropped spindles ( Disc or drum, your preference no extra charge)
- New Kings/links pressed together for linkpins OR New lowered balljoints for BJ style beams
- Blasted and painted up trailing arms
- Everything bolted up and ready to go, just add your steering box and alignment.
* Core torsions and etc. required
**** Shipping usually runs $150-250 depending on your location. Its a 60" box weighing 90lbs!******
Check our site for several more examples of work we have put out.
www.Valleyautowerks.com
Please contact me for more info, or to get started on your car!
Thank you!
- Sam
_________________
*Call Monday-Saturday, during buisness hours only please*
Buyer to pay actual shipping costs unless stated above, send zip code or country for shipping quote. I ship worldwide
Can also deliver to any SEVWA event!
**Paypal Preferred**
*If you call please leave a message w/ your number if you dont reach me!"
www.Valleyautowerks.com
|
|
|
|
|
