|
|
Additional Photos
Click for full-size image
L & R arrow keys scroll through photos |
PureC4's Ride , BADASS!!! |
bolt on frame head bracing $150 |
Dirtbag From Australia yes I ship internationally |
High quality welds by a skilled professional technician of 26 years! |
Here is my 8" bj/bj Beam Extender |
easy bolt on design |
super clean look!! |
Dbug41's Custom part when only the very best will do here is the proof! |
steel has been my life since 1988 when I became a Structural Ironworker for local 377 in S.F. CA. |
Mark Glasscocks build now at Airkooled Kustoms |
The VolksRod Shop is open!!!! |
Type3Tom's Badd MoFo! |
Brian's VolksRod another amazing man I can call my friend |
Marks Sweet ride is almost completely hand built and amazing. Using my 10" ext. |
This is a great piece built by Cody in a 1 car garage with basic hand tools and a welder In 1 year |
The Big 10" |
New Logo! |
As seen in Hot VW |
|
|
SALE! VolksRod Beam Extender FREE HARDWARE! Price: $240.00 Shipped
|
That's right $240.00 SHIPPED
SEEN I APRIL'S HOT VW'S pg57!
The VolksRod Shop has the best customer service and best reputation
so give me a call. You can always reach me, if not I will call you back.
Here's my number 801-529-5153
here's my email [email protected]
I have brought my plasma cutting operation in-house
using vertical integration I have streamline my process and I am passing the savings on to you!!!
Extending your wheel base has now been made easier than ever.
With just a sawzall, welder and basic hand tools you can get that
hot rod stance with a weekend of work. Extender is a simple bolt on
unit with minimal welding required to extend the steering. This thread will show you how.
Extending your steering shaft made easy!
http://www.volksrods.com/forum/showthread.php?goto=newpost&t=33624
This is a 8", 10", beam extender
ball joint to ball joint
link pin to link pin
or any other combo
2 1/2" drop
5 degree caster built-in
8 degrees make them way to hard to steer at slow speeds in town.
I am the only CERTIFIED WELDER making beam extenders and
I've been welding since I was 14 on my families dairy ranch
where I was taught the value of honesty, quality and a strong work ethic
I have an outstanding customer service record
so call me let me prove it
paint or powder as you wish it will come raw
I am certified in many aspects of the welding industry and have been for 27 years
I do nondestructive testing (ultra-sound) to insure quality and your safety
These are critical sub-structure elements of your car.
I am the ONLY beam extender vendor sanctioned by VolksRods.com this certifies that I have been fully vetted and I won't rip you off.
if you have questions call me or read up on this thread
BEAM EXTENDERS THE BASICS 101
http://www.volksrods.com/forum/showthread.php?t=29555
Frame head bracing is a must!
I also have those available for $150 shipped and its just a bolt on!!!
Check out my build thread on VolksRods.com
http://www.volksrods.com/forum/showthread.php?t=30790
For international shipments;
shipped from 84015
weight is 30 lbs.
dimensions of shipping boxes are 15"x11"x11"
I ship by FedEx use their website to get a quote
so you can see for yourself how expensive it is.
Please direct all issues over shipping cost to FedEx as they are the ones who control that.
LIMITATION OF LIABILITY
IN NO EVENT SHALL Douglas W Fuller (Dbug41) BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, PUNITIVE, CONSEQUENTIAL OR ANY OTHER DAMAGES WHATSOEVER, WHETHER IN ACTION OR UNDER CONTRACT, TORT OR OTHERWISE. Under no circumstance, including, but not limited to, negligence, shall Douglas W Fuller (Dbug41) be liable for any damages that result from the use of, or inability to use, the information, materials or products contained in or purchased from this site. Further, Douglas W Fuller (Dbug41) shall have no liability or responsibility for any delay in the delivery, installation or use of the products, as well as the service life of the products, performance, applicability for the used intended, proper installation, or the accuracy of information provided.
_________________
Your satisfaction is my greatest concern.
please check my feedback for the proof of this for youself
you will be more than happy with my service!
[email protected]
mail spindle cores to:
Douglas W Fuller 801-529-5153
1200s 1500e # 2093
clearfield UT 84015
Thank you for viewing my add. Doug
|
| Advertiser information |
Ad information |
Advertiser:
Name:
Phone:
Member since:
|
Dbug41 
Doug
801 529-5153
December 06, 2006
|
|
|
|
Location:
Ad placed:
Ad updated:
Views:
Category:
Payments accepted:
|
Clearfield, Utah, USA Map it
Sun Dec 20, 2009 7:17 pm
Thu Mar 07, 2013 9:31 pm
48993
Parts - General Parts
Cash
Paypal
Money order/Bank check
Personal check
Credit cards
|
|
|
Watch this ad | 
|
|
Watch this seller |
Share:   
|
|
|
|
