Hello! Log in or Register   |  Help  |  Donate  |  Buy Shirts  See all banner ads | Advertise on TheSamba.com  
TheSamba.com
 
Parts/Accessories - Ghia
Moderators: None
Page: 1, 2, 3 ... 67, 68, 69  Next
Jump to:
Upload Pic
Title only
Category :: Parts/Accessories - Ghia
anodized side panel in engine compartment
Posted: Mon Jun 27, 2016 5:03 am
Size: 1600x1200   Views: 21
Rating: Not rated
anodized side panel in engine compartment
crocteau
worked up some aluminum side panels for engine compartment, had them hard anodized black, and used Camloc quarter-turn fasteners to hold in place


View other images:
From crocteau Rows Grid   
Search Forums for photo

Forum code:
 
engine in place in Ghia
Posted: Fri Jun 24, 2016 4:03 pm
Size: 1600x1200   Views: 14
Rating: Not rated
engine in place in Ghia
crocteau
from the stand to slipping onto the lower studs took less than ten minutes; had to remove the dipstick to clear the rear apron, and from there on it was smooth sailing


View other images:
From crocteau Rows Grid   
Search Forums for photo

Forum code:
 
ready to re-install engine in Ghia
Posted: Fri Jun 24, 2016 3:55 pm
Size: 1600x1200   Views: 7
Rating: Not rated
ready to re-install engine in Ghia
crocteau
had to strip car from the doors back for rear-end collision repair


View other images:
From crocteau Rows Grid   
Search Forums for photo

Forum code:
 
bumper bracket cover
Posted: Fri Jun 24, 2016 3:42 pm
Size: 1600x1200   Views: 2
Rating: Not rated
bumper bracket cover
crocteau
right rear bumper bracket and cover installed before mounting outer bumper blade


View other images:
From crocteau Rows Grid   
Search Forums for photo

Forum code:
 
Ghia 71 Tab
Posted: Thu Jun 23, 2016 9:32 pm
Size: 900x1600   Views: 14
Rating: Not rated
Ghia 71 Tab
Bloku
tab


View other images:
From Bloku Rows Grid   
Search Forums for photo

Forum code:
 
Oklahoma
Posted: Thu Jun 23, 2016 9:30 pm
Size: 1600x900   Views: 7
Rating: Not rated
Oklahoma
Bloku
Black Plate "Decals"


View other images:
From Bloku Rows Grid   
Search Forums for photo

Forum code:
 
Oklahoma
Posted: Thu Jun 23, 2016 9:30 pm
Size: 1600x1031   Views: 9
Rating: Not rated
Oklahoma
Bloku
Black Plate "Decals"


View other images:
From Bloku Rows Grid   
Search Forums for photo

Forum code:
 
Oklahoma
Posted: Thu Jun 23, 2016 9:30 pm
Size: 1600x900   Views: 14
Rating: Not rated
Oklahoma
Bloku
Black Plate "Decals"


View other images:
From Bloku Rows Grid   
Search Forums for photo

Forum code:
 
WCM tar board
Posted: Tue Jun 21, 2016 6:25 am
Size: 1600x1600   Views: 15
Rating: Not rated
WCM tar board
PeteSC
West Coast Metric tar board kit. It's a very nice product.


View other images:
From PeteSC Rows Grid   
Search Forums for photo

Forum code:
 
Harrington stainless front bumper
Posted: Tue Jun 21, 2016 6:10 am
Size: 640x480   Views: 12
Rating: Not rated
Harrington stainless front bumper
PeteSC
Finally got it to fit after modifying by loosening bolts that hold blade sections to center piece, then removing the guards and their retaining bolts. Pushed blade ends outward until it measured 59.25" from inside of blade end to end. Tightened center section bolts carefully while not letting blades draw back in (maintain 59.25" spread). Re-drilled bolt holes for guards since they now were off due to pushing the blades outward, then reinstall guards.

Blade end-to-body nut plates are at the wrong angle, so I drilled out the nut and inserted a rivet nut at the correct angle, secured w/ JB weld. Seems to be holding - these are more for stability of the blade ends rather than holding significant weight it seems. Time will tell.


View other images:
From PeteSC Rows Grid   
Search Forums for photo

Forum code:
 
Harrington stainless front bumper
Posted: Tue Jun 21, 2016 6:10 am
Size: 640x480   Views: 7
Rating: Not rated
Harrington stainless front bumper
PeteSC
Finally got it to fit after modifying by loosening bolts that hold blade sections to center piece, then removing the guards and their retaining bolts. Pushed blade ends outward until it measured 59.25" from inside of blade end to end. Tightened center section bolts carefully while not letting blades draw back in (maintain 59.25" spread). Re-drilled bolt holes for guards since they now were off due to pushing the blades outward, then reinstall guards.

Blade end-to-body nut plates are at the wrong angle, so I drilled out the nut and inserted a rivet nut at the correct angle, secured w/ JB weld. Seems to be holding - these are more for stability of the blade ends rather than holding significant weight it seems. Time will tell.


View other images:
From PeteSC Rows Grid   
Search Forums for photo

Forum code:
 
Harrington stainless front bumper
Posted: Tue Jun 21, 2016 6:10 am
Size: 640x480   Views: 20
Rating: Not rated
Harrington stainless front bumper
PeteSC
Finally got it to fit after modifying by loosening bolts that hold blade sections to center piece, then removing the guards and their retaining bolts. Pushed blade ends outward until it measured 59.25" from inside of blade end to end. Tightened center section bolts carefully while not letting blades draw back in (maintain 59.25" spread). Re-drilled bolt holes for guards since they now were off due to pushing the blades outward, then reinstall guards.

Blade end-to-body nut plates are at the wrong angle, so I drilled out the nut and inserted a rivet nut at the correct angle, secured w/ JB weld. Seems to be holding - these are more for stability of the blade ends rather than holding significant weight it seems. Time will tell.


View other images:
From PeteSC Rows Grid   
Search Forums for photo

Forum code:
 
Weber IDF40 Throttle
Posted: Mon Jun 20, 2016 7:43 pm
Size: 1201x1600   Views: 13
Rating: Not rated
Weber IDF40 Throttle
RHough
photos of idle, transition and vacuum advance ports


View other images:
From RHough Rows Grid   
Search Forums for photo

Forum code:
 
Weber IDF40 Throttle
Posted: Mon Jun 20, 2016 7:43 pm
Size: 1201x1600   Views: 8
Rating: Not rated
Weber IDF40 Throttle
RHough
photos of idle, transition and vacuum advance ports


View other images:
From RHough Rows Grid   
Search Forums for photo

Forum code:
 
Weber IDF40 Throttle
Posted: Mon Jun 20, 2016 7:43 pm
Size: 1201x1600   Views: 8
Rating: Not rated
Weber IDF40 Throttle
RHough
photos of idle, transition and vacuum advance ports


View other images:
From RHough Rows Grid   
Search Forums for photo

Forum code:
 
Harrington stainless euro bumper
Posted: Fri Jun 10, 2016 5:25 am
Size: 1600x1200   Views: 48
Rating: Not rated
Harrington stainless euro bumper
PeteSC
Well they can make a rear bumper that bolts right up....why is the front so difficult?


View other images:
From PeteSC Rows Grid   
Search Forums for photo

Forum code:
 
Harrington bumpers from CIP1
Posted: Thu Jun 09, 2016 5:32 am
Size: 1200x1600   Views: 16
Rating: Not rated
Harrington bumpers from CIP1
PeteSC


View other images:
From PeteSC Rows Grid   
Search Forums for photo

Forum code:
 
Harrington bumpers from CIP1
Posted: Thu Jun 09, 2016 5:15 am
Size: 1600x1200   Views: 12
Rating: Not rated
Harrington bumpers from CIP1
PeteSC
They look nice when assembled, but the front bumper is 2.25" shorter than an original bumper


View other images:
From PeteSC Rows Grid   
Search Forums for photo

Forum code:
 
Harrington bumpers from CIP1
Posted: Thu Jun 09, 2016 5:15 am
Size: 1200x1600   Views: 9
Rating: Not rated
Harrington bumpers from CIP1
PeteSC
They look nice when assembled, but the front bumper is 2.25" shorter than an original bumper


View other images:
From PeteSC Rows Grid   
Search Forums for photo

Forum code:
 
kraftfahrzeugbrief
Posted: Mon Jun 06, 2016 2:44 pm
Size: 900x1600   Views: 13
Rating: Not rated
kraftfahrzeugbrief
Joostt


View other images:
From Joostt Rows Grid   
Search Forums for photo

Forum code:
 
IDF w/32 mm Venturi
Posted: Wed Jun 01, 2016 9:17 pm
Size: 900x1600   Views: 12
Rating: Not rated
IDF w/32 mm Venturi
RHough
The intake eye view of IDF40's with short velocity stacks


View other images:
From RHough Rows Grid   
Search Forums for photo

Forum code:
 
IDF w/32 mm Venturi
Posted: Wed Jun 01, 2016 9:17 pm
Size: 900x1600   Views: 10
Rating: Not rated
IDF w/32 mm Venturi
RHough
The intake eye view of IDF40's with short velocity stacks


View other images:
From RHough Rows Grid   
Search Forums for photo

Forum code:
 
IDF w/32 mm Venturi
Posted: Wed Jun 01, 2016 9:17 pm
Size: 900x1600   Views: 7
Rating: Not rated
IDF w/32 mm Venturi
RHough
The intake eye view of IDF40's with short velocity stacks


View other images:
From RHough Rows Grid   
Search Forums for photo

Forum code:
 
IDF w/32 mm Venturi
Posted: Wed Jun 01, 2016 9:17 pm
Size: 900x1600   Views: 8
Rating: Not rated
IDF w/32 mm Venturi
RHough
The intake eye view of IDF40's with short velocity stacks


View other images:
From RHough Rows Grid   
Search Forums for photo

Forum code:
 
IDF w/32 mm Venturi
Posted: Wed Jun 01, 2016 9:17 pm
Size: 1600x900   Views: 7
Rating: Not rated
IDF w/32 mm Venturi
RHough
The intake eye view of IDF40's with short velocity stacks


View other images:
From RHough Rows Grid   
Search Forums for photo

Forum code:
 
IDF w/32 mm Venturi
Posted: Wed Jun 01, 2016 9:17 pm
Size: 1600x900   Views: 11
Rating: Not rated
IDF w/32 mm Venturi
RHough
The intake eye view of IDF40's with short velocity stacks


View other images:
From RHough Rows Grid   
Search Forums for photo

Forum code:
 
Heatpump
Posted: Sun May 29, 2016 6:46 am
Size: 562x339   Views: 22
Rating: Not rated
Heatpump
SoCalJes
Heat pump ac with reversing valve


View other images:
From SoCalJes Rows Grid   
Search Forums for photo

Forum code:
 
Heatpump
Posted: Sun May 29, 2016 6:46 am
Size: 640x384   Views: 10
Rating: Not rated
Heatpump
SoCalJes
Heat pump ac with reversing valve


View other images:
From SoCalJes Rows Grid   
Search Forums for photo

Forum code:
 
1915
Posted: Sun May 22, 2016 10:57 am
Size: 1600x900   Views: 25
Rating: Not rated
1915
bugguy1967
1915, CB 2234, 034 heads, stock balanced bottom end, stock fly and equalizer pulley, AA 94s, CB/Manton Aluminum pushrods, 8.5:1 comp, 1 3/8" header, 40 HPMXs


View other images:
From bugguy1967 Rows Grid   
Search Forums for photo

Forum code:
 
NOS karmann ghia battery tray
Posted: Sat May 21, 2016 7:54 am
Size: 1600x1200   Views: 11
Rating: Not rated
NOS karmann ghia battery tray
Jake Martinez
NOS karmann ghia battery tray


View other images:
From Jake Martinez Rows Grid   
Search Forums for photo

Forum code:
 
NOS karmann ghia battery tray
Posted: Sat May 21, 2016 7:54 am
Size: 1600x1200   Views: 15
Rating: Not rated
NOS karmann ghia battery tray
Jake Martinez
NOS karmann ghia battery tray


View other images:
From Jake Martinez Rows Grid   
Search Forums for photo

Forum code:
 
NOS karmann ghia battery tray
Posted: Sat May 21, 2016 7:54 am
Size: 1600x1200   Views: 10
Rating: Not rated
NOS karmann ghia battery tray
Jake Martinez
NOS karmann ghia battery tray


View other images:
From Jake Martinez Rows Grid   
Search Forums for photo

Forum code:
 
Lowlight Bumpers, Headlights, Turn Signals
Posted: Sun May 15, 2016 8:57 pm
Size: 1200x1600   Views: 21
Rating: Not rated
Lowlight Bumpers, Headlights, Turn Signals
vegasSTEVE
Test fitting


View other images:
From vegasSTEVE Rows Grid   
Search Forums for photo

Forum code:
 
Lowlight Bumpers, Headlights, Turn Signals
Posted: Sun May 15, 2016 8:57 pm
Size: 1600x1200   Views: 24
Rating: Not rated
Lowlight Bumpers, Headlights, Turn Signals
vegasSTEVE
Test fitting


View other images:
From vegasSTEVE Rows Grid   
Search Forums for photo

Forum code:
 
Lowlight Bumpers, Headlights, Turn Signals
Posted: Sun May 15, 2016 8:57 pm
Size: 1600x1200   Views: 26
Rating: Not rated
Lowlight Bumpers, Headlights, Turn Signals
vegasSTEVE
Test fitting


View other images:
From vegasSTEVE Rows Grid   
Search Forums for photo

Forum code:
 
Lowlight Bumpers, Headlights, Turn Signals
Posted: Sun May 15, 2016 8:57 pm
Size: 1600x1200   Views: 20
Rating: Not rated
Lowlight Bumpers, Headlights, Turn Signals
vegasSTEVE
Test fitting


View other images:
From vegasSTEVE Rows Grid   
Search Forums for photo

Forum code:
 
Lowlight Bumpers, Headlights, Turn Signals
Posted: Sun May 15, 2016 8:57 pm
Size: 1600x1200   Views: 11
Rating: Not rated
Lowlight Bumpers, Headlights, Turn Signals
vegasSTEVE
Test fitting


View other images:
From vegasSTEVE Rows Grid   
Search Forums for photo

Forum code:
 
for the forums
Posted: Sun May 15, 2016 6:32 pm
Size: 1600x1200   Views: 17
Rating: Not rated
for the forums
kingkarmann
stuck in my engine duh!!!


View other images:
From kingkarmann Rows Grid   
Search Forums for photo

Forum code:
 
for the forums
Posted: Sun May 15, 2016 6:32 pm
Size: 1600x1200   Views: 20
Rating: Not rated
for the forums
kingkarmann
stuck in my engine duh!!!


View other images:
From kingkarmann Rows Grid   
Search Forums for photo

Forum code:
 
european turn signal switch
Posted: Mon May 09, 2016 5:11 pm
Size: 640x480   Views: 27
Rating: Not rated
european turn signal switch
djway3474


View other images:
From djway3474 Rows Grid   
Search Forums for photo

Forum code:
 
Tachometer
Posted: Mon May 09, 2016 7:02 am
Size: 1200x1600   Views: 17
Rating: Not rated
Tachometer
vegasSTEVE
Tachometer from Ghia clock + Speedo Glass + 914-4 tachometer + patience


View other images:
From vegasSTEVE Rows Grid   
Search Forums for photo

Forum code:
 
Tachometer
Posted: Mon May 09, 2016 7:02 am
Size: 1485x1600   Views: 11
Rating: Not rated
Tachometer
vegasSTEVE
Tachometer from Ghia clock + Speedo Glass + 914-4 tachometer + patience


View other images:
From vegasSTEVE Rows Grid   
Search Forums for photo

Forum code:
 
Tachometer
Posted: Mon May 09, 2016 7:02 am
Size: 1200x1600   Views: 10
Rating: Not rated
Tachometer
vegasSTEVE
Tachometer from Ghia clock + Speedo Glass + 914-4 tachometer + patience


View other images:
From vegasSTEVE Rows Grid   
Search Forums for photo

Forum code:
 
Tachometer
Posted: Mon May 09, 2016 7:02 am
Size: 1200x1600   Views: 11
Rating: Not rated
Tachometer
vegasSTEVE
Tachometer from Ghia clock + Speedo Glass + 914-4 tachometer + patience


View other images:
From vegasSTEVE Rows Grid   
Search Forums for photo

Forum code:
 
Tachometer
Posted: Mon May 09, 2016 7:02 am
Size: 1200x1600   Views: 15
Rating: Not rated
Tachometer
vegasSTEVE
Tachometer from Ghia clock + Speedo Glass + 914-4 tachometer + patience


View other images:
From vegasSTEVE Rows Grid   
Search Forums for photo

Forum code:
 
Tachometer
Posted: Mon May 09, 2016 7:01 am
Size: 1200x1600   Views: 16
Rating: Not rated
Tachometer
vegasSTEVE
Tachometer from Ghia clock + Speedo Glass + 914-4 tachometer + patience


View other images:
From vegasSTEVE Rows Grid   
Search Forums for photo

Forum code:
 
Tachometer
Posted: Mon May 09, 2016 7:01 am
Size: 1600x1200   Views: 31
Rating: Not rated
Tachometer
vegasSTEVE
Tachometer from Ghia clock + Speedo Glass + 914-4 tachometer + patience


View other images:
From vegasSTEVE Rows Grid   
Search Forums for photo

Forum code:
 
Tachometer
Posted: Mon May 09, 2016 7:01 am
Size: 900x1600   Views: 10
Rating: Not rated
Tachometer
vegasSTEVE
Tachometer from Ghia clock + Speedo Glass + 914-4 tachometer + patience


View other images:
From vegasSTEVE Rows Grid   
Search Forums for photo

Forum code:
 
Tachometer
Posted: Mon May 09, 2016 7:01 am
Size: 1075x960   Views: 22
Rating: Not rated
Tachometer
vegasSTEVE
Tachometer from Ghia clock + Speedo Glass + 914-4 tachometer + patience


View other images:
From vegasSTEVE Rows Grid   
Search Forums for photo

Forum code:
 
Karmann Ghia engine compartment side panel
Posted: Sun May 08, 2016 12:07 pm
Size: 1600x1200   Views: 51
Rating: Not rated
Karmann Ghia engine compartment side panel
crocteau
work in progress


View other images:
From crocteau Rows Grid   
Search Forums for photo

Forum code:
 
Select sort method:  Order:  
Gallery Index -> Parts/Accessories - Ghia

Page: 1, 2, 3 ... 67, 68, 69  Next
Jump to:
All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 69
Jump to:  


You cannot upload new pics in this category
You cannot rate pics in this category
You cannot edit your pics and comments in this category
You cannot delete your pics and comments in this category

About | Help! | Advertise | Donate | Premium Membership | Privacy/Terms of Use | Contact Us | Site Map
Copyright © 1996-2015, Everett Barnes. All Rights Reserved.
Not affiliated with or sponsored by Volkswagen of America | Forum powered by phpBB