Parts/Accessories - Other

boomer1389 · Posted: Wed Jan 29, 2014 9:13 am Size: 1200x1600 Views: 19 Rating: Not rated

boomer1389

boomer1389 · Posted: Wed Jan 29, 2014 9:13 am Size: 1200x1600 Views: 18 Rating: Not rated

boomer1389

boomer1389 · Posted: Wed Jan 29, 2014 9:13 am Size: 1600x1195 Views: 25 Rating: Not rated

boomer1389

boomer1389 · Posted: Wed Jan 29, 2014 9:13 am Size: 1600x1195 Views: 19 Rating: Not rated

boomer1389

hazetguy · Posted: Wed Jan 29, 2014 8:50 am Size: 1200x1600 Views: 34 Rating: Not rated

hazetguy
Steering pivot bolts, early and late.

esde · Posted: Wed Jan 29, 2014 6:30 am Size: 1200x1600 Views: 116 Rating: Not rated

esde

ateneo · Posted: Tue Jan 28, 2014 8:45 pm Size: 1600x1200 Views: 54 Rating: Not rated

ateneo

BL3Manx · Posted: Tue Jan 28, 2014 7:31 pm Size: 1600x998 Views: 63 Rating: Not rated

BL3Manx

hazetguy · Posted: Tue Jan 28, 2014 10:51 am Size: 1600x1200 Views: 55 Rating: Not rated

hazetguy
From Bentley service manual

hazetguy · Posted: Tue Jan 28, 2014 10:50 am Size: 1200x1600 Views: 43 Rating: Not rated

hazetguy
From Bentley service manual.

PappaTiempo · Posted: Sun Jan 26, 2014 5:29 am Size: 1600x1200 Views: 62 Rating: Not rated

PappaTiempo

NorEr97 · Posted: Sat Jan 25, 2014 8:56 am Size: 1600x1600 Views: 50 Rating: Not rated

NorEr97

NorEr97 · Posted: Sat Jan 25, 2014 8:56 am Size: 1600x1600 Views: 52 Rating: Not rated

NorEr97

NorEr97 · Posted: Sat Jan 25, 2014 8:56 am Size: 1200x1600 Views: 31 Rating: Not rated

NorEr97

Envious · Posted: Sat Jan 25, 2014 3:45 am Size: 730x650 Views: 45 Rating: Not rated

Envious

JimJ · Posted: Fri Jan 24, 2014 10:51 am Size: 900x772 Views: 90 Rating: Not rated

JimJ
My rebuilt 1385 after spinning a bearing and breaking #2 main saddle.

DONGKG · Posted: Fri Jan 24, 2014 1:46 am Size: 461x328 Views: 24 Rating: Not rated

DONGKG

Jake Martinez · Posted: Thu Jan 23, 2014 5:57 pm Size: 653x368 Views: 99 Rating: Not rated

Jake Martinez
I know its been a while since ive posted pictures of my finds. but ive still been finding stuff! heres some stuff I came across yesterday!

hazetguy · Posted: Thu Jan 23, 2014 2:14 pm Size: 1280x960 Views: 96 Rating: Not rated

hazetguy
I've often wondered how a 3 arm engine stand would actually bolt to an engine case since the case separates.
It turns out that one arm is slightly shorter than the other and allows clearance for the case half when removing or installing.

hazetguy · Posted: Thu Jan 23, 2014 2:14 pm Size: 960x1280 Views: 60 Rating: Not rated

hazetguy
I've often wondered how a 3 arm engine stand would actually bolt to an engine case since the case separates.
It turns out that one arm is slightly shorter than the other and allows clearance for the case half when removing or installing.
How it looks when case is together.

hazetguy · Posted: Thu Jan 23, 2014 2:14 pm Size: 1280x960 Views: 71 Rating: Not rated

hazetguy
I've often wondered how a 3 arm engine stand would actually bolt to an engine case since the case separates.
It turns out that one arm is slightly shorter than the other and allows clearance for the case half when removing or installing.
How it looks when case is together.

hazetguy · Posted: Thu Jan 23, 2014 2:14 pm Size: 960x1280 Views: 44 Rating: Not rated

hazetguy
I've often wondered how a 3 arm engine stand would actually bolt to an engine case since the case separates.
It turns out that one arm is slightly shorter than the other and allows clearance for the case half when removing or installing.
You can see the slight gap of the shorter arm, allowing the case half to pass by it when removing or installing.

hazetguy · Posted: Thu Jan 23, 2014 2:14 pm Size: 1280x960 Views: 71 Rating: Not rated

hazetguy
I've often wondered how a 3 arm engine stand would actually bolt to an engine case since the case separates.
It turns out that one arm is slightly shorter than the other and allows clearance for the case half when removing or installing.

hazetguy · Posted: Thu Jan 23, 2014 2:14 pm Size: 1280x960 Views: 47 Rating: Not rated

hazetguy
I've often wondered how a 3 arm engine stand would actually bolt to an engine case since the case separates.
It turns out that one arm is slightly shorter than the other and allows clearance for the case half when removing or installing.
The two arms (along the bottom) have a slight groove cut in them that fits around the flange on the engine case.

hazetguy · Posted: Thu Jan 23, 2014 2:14 pm Size: 1280x960 Views: 44 Rating: Not rated

hazetguy
I've often wondered how a 3 arm engine stand would actually bolt to an engine case since the case separates.
It turns out that one arm is slightly shorter than the other and allows clearance for the case half when removing or installing.
Light passing under the 3rd arm shows how it is shorter than the other two arms.

hazetguy · Posted: Thu Jan 23, 2014 2:14 pm Size: 1280x960 Views: 21 Rating: Not rated

hazetguy
I've often wondered how a 3 arm engine stand would actually bolt to an engine case since the case separates.
It turns out that one arm is slightly shorter than the other and allows clearance for the case half when removing or installing.
The two arms (along the bottom) have a slight groove cut in them that fits around the flange on the engine case.

hazetguy · Posted: Thu Jan 23, 2014 2:14 pm Size: 1280x960 Views: 47 Rating: Not rated

hazetguy
I've often wondered how a 3 arm engine stand would actually bolt to an engine case since the case separates.
It turns out that one arm is slightly shorter than the other and allows clearance for the case half when removing or installing.
The two arms (along the bottom) have a slight groove cut in them that fits around the flange on the engine case.

hazetguy · Posted: Thu Jan 23, 2014 2:14 pm Size: 1280x960 Views: 28 Rating: Not rated

hazetguy
I've often wondered how a 3 arm engine stand would actually bolt to an engine case since the case separates.
It turns out that one arm is slightly shorter than the other and allows clearance for the case half when removing or installing.The two arms have a slight groove cut in them that fits around the flange on the engine case. The shorter 3rd arm does not have this groove. It is not necessary because it does not come in contact with the case.

jason · Posted: Tue Jan 21, 2014 9:28 pm Size: 1600x1200 Views: 59 Rating: Not rated

jason

ITD · Posted: Tue Jan 21, 2014 4:25 pm Size: 1600x902 Views: 28 Rating: Not rated

ITD
Adding on to the shed to provide work space.

folks55 · Posted: Tue Jan 21, 2014 12:51 am Size: 640x480 Views: 202 Rating: Not rated

folks55
A perfect example of a Heilite kitchenette

esde · Posted: Mon Jan 20, 2014 9:44 pm Size: 1600x1200 Views: 53 Rating: Not rated

esde
Bugpack 1.4 rockers w webcam 86b

esde · Posted: Mon Jan 20, 2014 9:44 pm Size: 1600x1200 Views: 46 Rating: Not rated

esde
Bugpack 1.4 rockers w webcam 86b

esde · Posted: Mon Jan 20, 2014 9:44 pm Size: 1200x1600 Views: 46 Rating: Not rated

esde
Bugpack 1.4 rockers w webcam 86b

Gary · Posted: Mon Jan 20, 2014 5:32 pm Size: 1600x900 Views: 86 Rating: Not rated

Gary
12V European Blaupunkt

Gary · Posted: Mon Jan 20, 2014 5:32 pm Size: 1600x900 Views: 116 Rating: Not rated

Gary
12V European Blaupunkt

Gary · Posted: Mon Jan 20, 2014 5:32 pm Size: 1600x900 Views: 67 Rating: Not rated

Gary
12V European Blaupunkt

Gary · Posted: Mon Jan 20, 2014 5:32 pm Size: 1600x900 Views: 66 Rating: Not rated

Gary
12V European Blaupunkt

Gary · Posted: Mon Jan 20, 2014 5:32 pm Size: 1600x900 Views: 74 Rating: Not rated

Gary
12V European Blaupunkt

Gary · Posted: Mon Jan 20, 2014 5:32 pm Size: 1600x900 Views: 63 Rating: Not rated

Gary
12V European Blaupunkt

Gary · Posted: Mon Jan 20, 2014 5:32 pm Size: 1600x900 Views: 58 Rating: Not rated

Gary
12V European Blaupunkt

Gary · Posted: Mon Jan 20, 2014 5:32 pm Size: 1600x900 Views: 46 Rating: Not rated

Gary
12V European Blaupunkt

Bryan67 · Posted: Mon Jan 20, 2014 12:19 pm Size: 640x480 Views: 40 Rating: Not rated

Bryan67
5.5 VW journal

Bryan67 · Posted: Mon Jan 20, 2014 12:19 pm Size: 640x480 Views: 36 Rating: Not rated

Bryan67
5.5 VW journal

Bryan67 · Posted: Mon Jan 20, 2014 12:19 pm Size: 640x480 Views: 63 Rating: Not rated

Bryan67
5.5 VW journal

Keith · Posted: Sun Jan 19, 2014 10:14 pm Size: 640x960 Views: 66 Rating: Not rated

Keith

Jon65 · Posted: Sun Jan 19, 2014 1:42 pm Size: 661x496 Views: 518 Rating: Not rated

Jon65
Vintage Sears Penske Automotive Analyzer used to measure dwell, RPM, volts, etc.

Jon65 · Posted: Sun Jan 19, 2014 1:42 pm Size: 661x496 Views: 41 Rating: Not rated

Jon65
Wires for connecting a vintage Sears Penske Automotive Analyzer to a vehicle.

Used with: http://www.thesamba.com/vw/forum/album_page.php?pic_id=1161034

esde · Posted: Sun Jan 19, 2014 1:36 pm Size: 1200x1600 Views: 54 Rating: Not rated

esde
Weld on an-10 fitting

landkholdings · Posted: Sun Jan 19, 2014 7:18 am Size: 1600x1200 Views: 38 Rating: Not rated

landkholdings


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

Jump to:

You cannot upload new pics in this category You cannot rate pics in this category You cannot edit your pics and comments in this category You cannot delete your pics and comments in this category