55-67 Bus - Single Cabs

glideking · Posted: Sat May 24, 2014 4:46 pm Size: 800x532 Views: 39 Rating: Not rated

glideking

glideking · Posted: Sat May 24, 2014 4:46 pm Size: 800x532 Views: 46 Rating: Not rated

glideking

glideking · Posted: Sat May 24, 2014 4:46 pm Size: 800x532 Views: 65 Rating: Not rated

glideking

glideking · Posted: Sat May 24, 2014 3:28 pm Size: 800x532 Views: 26 Rating: Not rated

glideking
More repairs to the T.C.

glideking · Posted: Sat May 24, 2014 3:28 pm Size: 800x532 Views: 32 Rating: Not rated

glideking
More repairs to the T.C.

glideking · Posted: Sat May 24, 2014 3:28 pm Size: 800x532 Views: 29 Rating: Not rated

glideking
More repairs to the T.C.

glideking · Posted: Sat May 24, 2014 3:28 pm Size: 800x532 Views: 25 Rating: Not rated

glideking
More repairs to the T.C.

glideking · Posted: Sat May 24, 2014 3:28 pm Size: 800x532 Views: 35 Rating: Not rated

glideking
More repairs to the T.C.

glideking · Posted: Sat May 24, 2014 3:28 pm Size: 800x532 Views: 54 Rating: Not rated

glideking
More repairs to the T.C.

glideking · Posted: Sat May 24, 2014 3:10 pm Size: 800x532 Views: 55 Rating: Not rated

glideking
Before and ater shots

glideking · Posted: Sat May 24, 2014 3:10 pm Size: 800x532 Views: 47 Rating: Not rated

glideking
Before and ater shots

glideking · Posted: Sat May 24, 2014 3:10 pm Size: 800x532 Views: 90 Rating: Not rated

glideking
Before and ater shots

glideking · Posted: Sat May 24, 2014 2:39 pm Size: 800x532 Views: 60 Rating: Not rated

glideking
Before and after shots

glideking · Posted: Sat May 24, 2014 2:39 pm Size: 800x532 Views: 57 Rating: Not rated

glideking
Before and after shots

glideking · Posted: Sat May 24, 2014 2:39 pm Size: 800x532 Views: 35 Rating: Not rated

glideking
Before and after shots

glideking · Posted: Sat May 24, 2014 2:39 pm Size: 800x532 Views: 65 Rating: Not rated

glideking
Before and after shots

turntwo · Posted: Sat May 24, 2014 10:03 am Size: 1200x1600 Views: 71 Rating: Not rated

turntwo

ritchiet002 · Posted: Fri May 23, 2014 11:23 pm Size: 1600x900 Views: 82 Rating: Not rated

ritchiet002

crukab · Posted: Wed May 21, 2014 4:42 pm Size: 1600x1200 Views: 130 Rating: Not rated

crukab
The Bunny truck was busy, so the Split Truck was put into "action".......

Touch Nicks Thing · Posted: Mon May 19, 2014 3:46 pm Size: 1600x1600 Views: 207 Rating: Not rated

Touch Nicks Thing
9' truck bed, can't think of a better place to put the surfboard then on the rack? Questionable prop placement there, 15 point deduction from show points and automatic loss of previous trophies.

Touch Nicks Thing · Posted: Mon May 19, 2014 3:41 pm Size: 1600x1600 Views: 577 Rating: Not rated

Touch Nicks Thing
Greg and Clara's westy in front of John's SSSRK early morning at Farmington

Touch Nicks Thing · Posted: Mon May 19, 2014 3:40 pm Size: 1600x1600 Views: 161 Rating: Not rated

Touch Nicks Thing
Lance's snapped steering damper on the way to CTS 11.

glideking · Posted: Mon May 19, 2014 11:05 am Size: 800x532 Views: 60 Rating: Not rated

glideking

glideking · Posted: Mon May 19, 2014 10:31 am Size: 600x399 Views: 36 Rating: Not rated

glideking
Should it be a long stop or a short stop?

glideking · Posted: Sat May 17, 2014 2:12 pm Size: 800x556 Views: 108 Rating: Not rated

glideking

glideking · Posted: Sat May 17, 2014 2:01 pm Size: 800x532 Views: 96 Rating: Not rated

glideking

glideking · Posted: Sat May 17, 2014 2:01 pm Size: 800x532 Views: 64 Rating: Not rated

glideking

glideking · Posted: Sat May 17, 2014 2:01 pm Size: 800x532 Views: 75 Rating: Not rated

glideking

glideking · Posted: Sat May 17, 2014 2:01 pm Size: 800x532 Views: 47 Rating: Not rated

glideking

ornery snail · Posted: Fri May 16, 2014 1:02 pm Size: 1600x1200 Views: 75 Rating: Not rated

ornery snail

ornery snail · Posted: Fri May 16, 2014 1:02 pm Size: 1600x1200 Views: 35 Rating: Not rated

ornery snail

ornery snail · Posted: Fri May 16, 2014 1:02 pm Size: 1600x1200 Views: 36 Rating: Not rated

ornery snail

ornery snail · Posted: Fri May 16, 2014 1:02 pm Size: 1600x1200 Views: 33 Rating: Not rated

ornery snail

Schwing · Posted: Fri May 16, 2014 10:48 am Size: 480x640 Views: 76 Rating: Not rated

Schwing
Using bar clamps to adjust door gap before dogleg installation.

Schwing · Posted: Fri May 16, 2014 10:48 am Size: 480x640 Views: 50 Rating: Not rated

Schwing
Using bar clamps to adjust door gap before dogleg installation.

Schwing · Posted: Fri May 16, 2014 10:48 am Size: 640x480 Views: 95 Rating: Not rated

Schwing
Using bar clamps to adjust door gap before dogleg installation.

Schwing · Posted: Fri May 16, 2014 10:48 am Size: 640x480 Views: 83 Rating: Not rated

Schwing
Using bar clamps to adjust door gap before dogleg installation.

ornery snail · Posted: Fri May 16, 2014 8:06 am Size: 1200x1600 Views: 61 Rating: Not rated

ornery snail
It appears that the truck has been hit in the top right corner of the roof. the B pillar seems to have been pushed towards the rear 3/16 of an inch. The bottom appears to have moved forward about 1/8 of an inch. The gap on the treasure chest appears to be fine. There is a small bulge in the B pillar. In the cab section I will be replacing both dog legs, lower A pillars, floor board and the lower fender wells where they meet the floor board. also the inner / outer valance and a section across the lower nose. The door gaps on the drivers door seem to be fine about 1/4 all the way down. Has anyone encountered a similar problem or know of a good way to tweak the cab structure back in alignment so that I can have consistent door gap? The passenger door currently drags on the dog leg when it is opened and closed.

ornery snail · Posted: Fri May 16, 2014 8:06 am Size: 1200x1600 Views: 65 Rating: Not rated

ornery snail
It appears that the truck has been hit in the top right corner of the roof. the B pillar seems to have been pushed towards the rear 3/16 of an inch. The bottom appears to have moved forward about 1/8 of an inch. The gap on the treasure chest appears to be fine. There is a small bulge in the B pillar. In the cab section I will be replacing both dog legs, lower A pillars, floor board and the lower fender wells where they meet the floor board. also the inner / outer valance and a section across the lower nose. The door gaps on the drivers door seem to be fine about 1/4 all the way down. Has anyone encountered a similar problem or know of a good way to tweak the cab structure back in alignment so that I can have consistent door gap? The passenger door currently drags on the dog leg when it is opened and closed.

ornery snail · Posted: Fri May 16, 2014 8:06 am Size: 1200x1600 Views: 97 Rating: Not rated

ornery snail
It appears that the truck has been hit in the top right corner of the roof. the B pillar seems to have been pushed towards the rear 3/16 of an inch. The bottom appears to have moved forward about 1/8 of an inch. The gap on the treasure chest appears to be fine. There is a small bulge in the B pillar. In the cab section I will be replacing both dog legs, lower A pillars, floor board and the lower fender wells where they meet the floor board. also the inner / outer valance and a section across the lower nose. The door gaps on the drivers door seem to be fine about 1/4 all the way down. Has anyone encountered a similar problem or know of a good way to tweak the cab structure back in alignment so that I can have consistent door gap? The passenger door currently drags on the dog leg when it is opened and closed.

ornery snail · Posted: Fri May 16, 2014 8:06 am Size: 1600x1200 Views: 43 Rating: Not rated

ornery snail
It appears that the truck has been hit in the top right corner of the roof. the B pillar seems to have been pushed towards the rear 3/16 of an inch. The bottom appears to have moved forward about 1/8 of an inch. The gap on the treasure chest appears to be fine. There is a small bulge in the B pillar. In the cab section I will be replacing both dog legs, lower A pillars, floor board and the lower fender wells where they meet the floor board. also the inner / outer valance and a section across the lower nose. The door gaps on the drivers door seem to be fine about 1/4 all the way down. Has anyone encountered a similar problem or know of a good way to tweak the cab structure back in alignment so that I can have consistent door gap? The passenger door currently drags on the dog leg when it is opened and closed.

ornery snail · Posted: Fri May 16, 2014 8:06 am Size: 1600x1200 Views: 38 Rating: Not rated

ornery snail
It appears that the truck has been hit in the top right corner of the roof. the B pillar seems to have been pushed towards the rear 3/16 of an inch. The bottom appears to have moved forward about 1/8 of an inch. The gap on the treasure chest appears to be fine. There is a small bulge in the B pillar. In the cab section I will be replacing both dog legs, lower A pillars, floor board and the lower fender wells where they meet the floor board. also the inner / outer valance and a section across the lower nose. The door gaps on the drivers door seem to be fine about 1/4 all the way down. Has anyone encountered a similar problem or know of a good way to tweak the cab structure back in alignment so that I can have consistent door gap? The passenger door currently drags on the dog leg when it is opened and closed.

ornery snail · Posted: Fri May 16, 2014 8:06 am Size: 1600x1200 Views: 39 Rating: Not rated

ornery snail
It appears that the truck has been hit in the top right corner of the roof. the B pillar seems to have been pushed towards the rear 3/16 of an inch. The bottom appears to have moved forward about 1/8 of an inch. The gap on the treasure chest appears to be fine. There is a small bulge in the B pillar. In the cab section I will be replacing both dog legs, lower A pillars, floor board and the lower fender wells where they meet the floor board. also the inner / outer valance and a section across the lower nose. The door gaps on the drivers door seem to be fine about 1/4 all the way down. Has anyone encountered a similar problem or know of a good way to tweak the cab structure back in alignment so that I can have consistent door gap? The passenger door currently drags on the dog leg when it is opened and closed.

ornery snail · Posted: Fri May 16, 2014 8:06 am Size: 1600x1200 Views: 58 Rating: Not rated

ornery snail
It appears that the truck has been hit in the top right corner of the roof. the B pillar seems to have been pushed towards the rear 3/16 of an inch. The bottom appears to have moved forward about 1/8 of an inch. The gap on the treasure chest appears to be fine. There is a small bulge in the B pillar. In the cab section I will be replacing both dog legs, lower A pillars, floor board and the lower fender wells where they meet the floor board. also the inner / outer valance and a section across the lower nose. The door gaps on the drivers door seem to be fine about 1/4 all the way down. Has anyone encountered a similar problem or know of a good way to tweak the cab structure back in alignment so that I can have consistent door gap? The passenger door currently drags on the dog leg when it is opened and closed.

-BoB- · Posted: Fri May 16, 2014 7:43 am Size: 960x540 Views: 78 Rating: Not rated

-BoB-

-BoB- · Posted: Fri May 16, 2014 7:43 am Size: 960x540 Views: 47 Rating: Not rated

-BoB-

-BoB- · Posted: Fri May 16, 2014 7:43 am Size: 540x960 Views: 41 Rating: Not rated

-BoB-

-BoB- · Posted: Fri May 16, 2014 7:43 am Size: 540x960 Views: 34 Rating: Not rated

-BoB-

-BoB- · Posted: Fri May 16, 2014 7:43 am Size: 960x540 Views: 45 Rating: Not rated

-BoB-

-BoB- · Posted: Fri May 16, 2014 7:43 am Size: 960x540 Views: 47 Rating: Not rated

-BoB-


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

Jump to:

You cannot upload new pics in this category You cannot rate pics in this category You cannot edit your pics and comments in this category You cannot delete your pics and comments in this category