Ray74 Samba Member
Joined: June 08, 2014 Photos: 1 Location: United States
|
Brosol Fuel Pump Fix |
Posted: Tue Oct 21, 2014 9:34 pm Views: 61
Rating: Not rated
|
|
If you have access to a lathe, you can fix the pin sliding out problem by driving the pin out, chucking it in the lathe, center boring it, and then tapping a 6-32 thread on both ends. Drive the pin back in and install screws and washers on both sides. I also included lockwashers and loctite. |
|