1procrastinator Samba Member
Joined: September 12, 2007 Photos: 5
|
rear view of right hand drive beeline |
Posted: Tue Feb 05, 2008 6:19 pm Views: 517
Rating: Not rated
|
|
I have not added the pick up option yet, as this is a new build. The tail lights were home made, using half inch nuts placed on the inside of 3/4 inch tubing. Then, wire welded the tubing and nut together, and then welded nuts to tubing. Then I ran the wires on the inside of the tubing. |
|