hazetguy Samba Member
Joined: April 06, 2001 Photos: 6277 Location: iT StiNgeD iTseLf tO dEAd
|
Beetle Front Axle |
Posted: Tue Apr 22, 2008 5:31 pm Views: 286
Rating: Not rated
|
|
I noticed an excessive amount of freeplay in one of the trailing arms when trying to measure the offset for the link pin shims. Turns out the trailing arm and needle bearing were severely damaged, and that some repairs were necessary.
I made a tool to remove the bearing from the beam. I used some steel, an 8mm stud, and the housing of an oil pump puller. |
|