| ggflat |
Sun Mar 13, 2005 2:56 pm |
|
hello,
I cannot find push rod tube for my type4 engine (type CE case)
the diameter in the heads is 29.7mm instead of the usual 31.4mm, so the usual PR tube don't fit ...
does anyone know where I can find the right PR tube ?
a good address ?
thanks for your help...
ggflat |
|
| Rescue912 |
Sun Mar 13, 2005 7:03 pm |
|
Whoa, never seen any of those. You can try pelicanparts.com - if they don't have 'em try Raby at the type4store.com, he has a lotta cores and might be able to scab you some.
What are the casting #'s ? |
|
| Type4parts |
Tue Mar 15, 2005 6:51 pm |
|
What you have is a set of early heads.
Here is the part# 021 109 335 A Pushrod tube
The tube is NLA you will need to get a used one or have the Heads opened up for the later tubes. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|