| kfdf715 |
Sun Jun 26, 2005 2:28 pm |
|
| I have the 7-piece fiberglass baja kit and was wondering if the vw body moulding is used with this kit. The fenders are already on the bug and have a gap that I don't even think the moulding will fill. Am I suppossed to reshape the metal on the bug to conform to the fenders and such? Any help would be appreciated. |
|
| Nicksan |
Sun Jun 26, 2005 2:44 pm |
|
| If you want to you can, I used the front but not the back. Its a baja, do whatever you want. :) |
|
| baja5 |
Sun Jun 26, 2005 7:51 pm |
|
| Stock style fender beading should fill the gap pretty well, but you may need to do a little modification. i only have it on the rear of my car as i have a 1 piece front end. |
|
| SHMO |
Sun Jun 26, 2005 9:25 pm |
|
Baja5,
How well did the moulding fill the gap with your high mount fenders? Do you have any closeup pics?
SHMO |
|
| kfdf715 |
Mon Jun 27, 2005 9:48 pm |
|
| I will have to put some photos on the site. I have no moulding at this time and the gap at the front fenders is major. Hope I dont have to bend much metal. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|