Nevada Notch |
Wed Aug 24, 2005 8:22 am |
|
I have a problem with vibration in my motor at about 2000rpm so I am going to try a vacuum advance distributor to try and remedy the problem as some people have suggested. Do I need to run a vacuum line from both of my Weber 34mm carbs and "tee" it to my distributor or can I run it from just one carb? WIll I get proper advance from using just one carb? |
|
Russ Wolfe |
Wed Aug 24, 2005 8:33 am |
|
the original VW carbs only used the left carb for vacuum advance.
You might not even really need the vacuum advance if you are using a FI distributor. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|