| FAT KUDA |
Thu Aug 25, 2005 12:22 pm |
|
| How do you guys roll the inside fender lips on a square ? In all my other imports i would take a baseball bat and have my girlfriend roll the car back and forth, while im keeping the angle and twisting the bat, then i'd seal any raw metal. I'm a tin knocker by trade, so what input is out there. |
|
| blankmange |
Thu Aug 25, 2005 12:35 pm |
|
FAT KUDA wrote: How do you guys roll the inside fender lips on a square ? In all my other imports i would take a baseball bat and have my girlfriend roll the car back and forth, while im keeping the angle and twisting the bat, then i'd seal any raw metal. I'm a tin knocker by trade, so what input is out there.
pretty much the same procedure -- my question is why? |
|
| FAT KUDA |
Thu Aug 25, 2005 12:49 pm |
|
| Well, i have 195/50 15's on the rear, 145's on the front, and planning to go two splines all around 69 square. |
|
| Russ Wolfe |
Thu Aug 25, 2005 12:58 pm |
|
| Yu have an inner, and outer fender on a T-3. John Jaransen shows how it is done on his site, without the "baseball bat". He just slightly flared the inner fender and then put the outer fender back on. |
|
| FAT KUDA |
Thu Aug 25, 2005 1:02 pm |
|
| interesting |
|
| Russ Wolfe |
Thu Aug 25, 2005 1:06 pm |
|
| It jsut shows a slight bulge in the outer fender when done. |
|
| raru |
Thu Aug 25, 2005 1:06 pm |
|
| the front will be fine, i'm rolling the same. i have swing for the rear, but i would think you would be good. |
|
| Russ Wolfe |
Thu Aug 25, 2005 1:21 pm |
|
http://mywebpages.comcast.net/jaransonT3/jaransonT3/
It is in there someplace. How John did his rears. |
|
| blankmange |
Thu Aug 25, 2005 1:30 pm |
|
FAT KUDA wrote: Well, i have 195/50 15's on the rear, 145's on the front, and planning to go two splines all around 69 square.
I am running 195/60 15 all around with the front lowered 2 splines -- no rubbing issues and I didn't roll my fenders... |
|
| 73notch |
Thu Aug 25, 2005 2:12 pm |
|
| then your wheels arent floooooooosh enough 8) |
|
| Russ Wolfe |
Thu Aug 25, 2005 2:39 pm |
|
| I wonder if he has T-1 wheels on his car. that will make them rub in the rear. |
|
| jaransonT3 |
Thu Aug 25, 2005 3:49 pm |
|
Russ Wolfe wrote: http://mywebpages.comcast.net/jaransonT3/jaransonT3/
It is in there someplace. How John did his rears.
Close Russ. Here is the link to the gallery.
http://mywebpages.comcast.net/jjaranson/SophyRebuild/SophyRebuild.html
Here are a couple of specific pics..
Showing the inner fender lip extension...
and the resulting "bulge". It really only shows up in the reflections.
There are some other pictures. Just check out the link above. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|