| Airsick |
Sun Aug 28, 2005 6:39 pm |
|
| Where do you route the wires thru to get thru to the pockets on a 52 split? |
|
| johnshenry |
Sun Aug 28, 2005 6:47 pm |
|
You'll have to tell me what you mean by "the pockets" first.
:?: |
|
| johnshenry |
Sun Aug 28, 2005 6:49 pm |
|
Ok, now I read the post topic...
Sem wiring goes up the A pillars along the roofline and drops down in to the sem pockets on both sides.
It would be difficult to pu thte passenger side line in place if nothing is there already to act as a pull line and the main harness is in place. What is the situation?? |
|
| Airsick |
Mon Aug 29, 2005 8:57 am |
|
| I got the car with the wires already pulled out. I now have to find a way to run them thru. |
|
| johnshenry |
Mon Aug 29, 2005 9:13 am |
|
If the headliner is out, you can fish them through via the gap between the roof panel and the side members.
You will need 4 different pull lines in the car to get all of the harnesses in.
1. Left A pillar, trunk to left sem
2. Left side, trunk to engine bay
3. Right A pillar, trunk to right sem
4. Dome light location to engine bay
I can send you a paper copy of my installation guide if you like, I will not distribute it electronically. |
|
| Airsick |
Mon Aug 29, 2005 1:27 pm |
|
| That would be great. I 'll pm my address or would faxing to NH be easier? |
|
| Airsick |
Thu Sep 01, 2005 5:51 pm |
|
| Johnshenry did you get my PM? |
|
| johnshenry |
Thu Sep 01, 2005 5:58 pm |
|
I did dude. Manual went out this morning. You should ahve it tomorrow or Sat.
JH |
|
| Airsick |
Fri Sep 02, 2005 9:37 am |
|
| Thank you very much John. I love helpful vendors and when my split gets a little closer to the overhaul I'll be doing business with you. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|