| vweater1 |
Wed Dec 14, 2005 4:19 pm |
|
| O.k. I've never used a fuel injec dizzy with some stock solex's. How do I hook up the vaccum line to the carbs. Should the line go from dizzy then t-d to the carbs. Or just to the left carb and the dizzy. I see the dizzy has two connections to the vaccum canister and another sort of electrical connection on the side with three prongs. I know the other is the condensor but what do I hook up the other too... BTW my car is a 71sqbk with a 1641cc dp. Thanks for your help. :?: |
|
| Russ Wolfe |
Wed Dec 14, 2005 7:52 pm |
|
| Sounds like you have a '72 distributor. The vacuum goes between the left carb, and the outside vacuum nipple. Don't worry about the inner connection, that is the retard side. The 3 wire terminals on the side are for the trigger points for the injectors. You can pull those out and pass them on to a FI owner, or leave them in and cover up the hole. No wires to connect to them. |
|
| vweater1 |
Thu Dec 15, 2005 8:53 am |
|
| Thanks Russ, your knowledge is always greatly appreciated. Always answer my questions to the teeth. :D |
|
Powered by phpBB © 2001, 2005 phpBB Group
|