| JettaGLI |
Wed Jun 28, 2006 8:48 pm |
|
| Does anyone know who makes these seals for a resonable price? Im considering buying a Type-3 and have been looking for potential spare parts and I could not find any seals (for rear windows). Hope some one can direct me the right way. thanks! |
|
| 67'squareback |
Wed Jun 28, 2006 8:51 pm |
|
I have never looked into Fastback parts, however, ISP West has pretty much all you need.
www.vwispwest.com |
|
| KTPhil |
Wed Jun 28, 2006 8:52 pm |
|
| Sad answer seems to be NOBODY. I'm taking mine off the car and putting the old fixed ones back in with new rubber, since my old rubber is as hard as peanut brittle and leaks like a sieve. |
|
| JettaGLI |
Wed Jun 28, 2006 9:40 pm |
|
| with so many type-3 owners its hard to think that these seals arent available... what gives?? thanks for the replies!! |
|
| blankmange |
Thu Jun 29, 2006 3:52 am |
|
the ONLY place you can find fastback pop-out seals are from donor cars - NOS ones do turn up occasionally, but they are going to be expensive and won't last long before someone will snap them up...
they are NLA...
good luck... |
|
| R.Rabbit |
Thu Jun 29, 2006 4:41 am |
|
JettaGLI wrote: with so many type-3 owners its hard to think that these seals arent available... what gives?? thanks for the replies!!
The reason I'm sure they are not made is because of the cost that would be involved in making them would not make it profitable to sell them. And it's ALL about the money.
When you pull yours off (after unscrewing them) take a look at the way they were made and you will see why it's is not cost effective.
Donor car out of a junk yard is you best bet or have some $$ set aside when a set does appear. Every juck yard you hit take a look. You may get lucky and get a right from one car in one juck yard and a left from another. That's how I got mine. Just keep looking till I got a good set about 90%. And I was VERY careful when I unistall/installed them. |
|
| 70fasty |
Thu Jun 29, 2006 9:26 am |
|
| I've been looking since I bought my car 2 years ago, they come up in the classifieds from time to time, but someone always swipes them before I do :? You just have to be quick mostly, or find some in a junkyard. |
|
| Bobnotch |
Thu Jun 29, 2006 5:15 pm |
|
| They've been NLA since 1990, as that was when I tried to get a new set for my wife's Fastback. At the time I originally ordered them, WCM had a set in stock. But by the time my money order got to them, they were gone and they weren't getting any more. :( I had to install fixed window seals, until I got lucky and found a good used set in the classisfieds on vwtype3.org (they came out of a car about 150 miles from me). They weren't perfect, but the rubber was in decent condition, and they do seal. This was back in 1998, so I haven't really been looking for another set, but I'd love to find a new set (they'll only go up in value). That being said, your best bet is to contact the T-3 Detectives. Bring plenty of cash, as the last I heard, they were going for about 150 per side. :shock: |
|
| Vee Dugg |
Tue Aug 01, 2006 12:01 pm |
|
Hey guys.....
My 68 fasty is about to undergo a restoration and the popout seals are in borderline shape. If they didn't have to come out for a new headliner to go in I would definitely keep them. (they're a little tired but uncracked for the most part) I had the procedure explained to me and it sounded like it is going to be pretty hard on them making the swap.
Do I need some cal look rubber as a backup?
Anyone in seattle want to do my glasswork in exchange for them?
Any words of experience would be appreciated. |
|
| vwfye |
Tue Aug 01, 2006 12:02 pm |
|
| wow, i have a pair of seals and glass for fasty pop outs in my garage... i thought for sure someone would buy them last thursday at the BBQ |
|
| blankmange |
Tue Aug 01, 2006 12:13 pm |
|
vwfye wrote: wow, i have a pair of seals and glass for fasty pop outs in my garage... i thought for sure someone would buy them last thursday at the BBQ
if you had them listed in an ad, they might sell.... |
|
| tristessa |
Tue Aug 01, 2006 12:17 pm |
|
vwfye wrote: wow, i have a pair of seals and glass for fasty pop outs in my garage... i thought for sure someone would buy them last thursday at the BBQ
You should've had a sign taped up near the weenies saying "Fastback Popout Seals For Sale, See Brian For Details". :lol:
*I* knew you had 'em, but mine are in decent shape and still seal. |
|
| vwfye |
Tue Aug 01, 2006 4:56 pm |
|
| well, they weren't listed because i was a bit pre-occupied from the point i received them until this last sunday. so, now i might do an ad, or not... |
|
| Vee Dugg |
Wed Aug 02, 2006 7:52 am |
|
I wrote: Hey guys.....
My 68 fasty is about to undergo a restoration and the popout seals are in borderline shape. If they didn't have to come out for a new headliner to go in I would definitely keep them. (they're a little tired but uncracked for the most part) I had the procedure explained to me and it sounded like it is going to be pretty hard on them making the swap.
Do I need some cal look rubber as a backup?
Anyone in seattle want to do my glasswork in exchange for them?
Any words of experience would be appreciated.
ANyone? |
|
| ivan_a_t3 |
Tue Oct 24, 2006 9:16 am |
|
| JUST THROWING THIS OUT THERE, BUT THERES NO WAY TO RIG UP STAIONARY SEALS TO WORK ON THE POP OUT WINDOWS???I REALLY WANT MY POP OUTS!!! :cry: |
|
| notchback |
Tue Oct 24, 2006 9:26 am |
|
| ivan_a_t3 wrote: JUST THROWING THIS OUT THERE, BUT THERES NO WAY TO RIG UP STAIONARY SEALS TO WORK ON THE POP OUT WINDOWS???I REALLY WANT MY POP OUTS!!! :cry: Not that I know of, but WTF is JettaGLI doing with my Avatar? I read the original question and asked myself "Why the hell did I ask that? I've known for years that they weren't available." |
|
| ivan_a_t3 |
Tue Oct 24, 2006 9:30 am |
|
| I GUESS ILL TURN THEM STAIONARY... |
|
| blankmange |
Tue Oct 24, 2006 11:14 am |
|
YEAH, YOU DO THAT....
geez, turn off the caps, man... |
|
| vwfye |
Tue Oct 24, 2006 11:21 am |
|
still have my pop out fasty glass w/ seals... again, they are there, but no one wants to spend $ to get them...
i never realized the whole world was as cheap as me! :lol: |
|
| 70fasty |
Tue Oct 24, 2006 11:24 am |
|
vwfye wrote: still have my pop out fasty glass w/ seals... again, they are there, but no one wants to spend $ to get them...
i never realized the whole world was as cheap as me! :lol:
Well if you still have them in about 6 months I'll buy em, but right now im poor, I can only spend money on stuff I need :( |
|
Powered by phpBB © 2001, 2005 phpBB Group
|