modelac |
Sun Sep 24, 2006 7:47 pm |
|
I am in the process of building a Nostalgia body on a Berrien Buggy tube chassis. Where do you run the brake line from the front to the back? Down the tunnel? Do I need to weld on some tabs? |
|
MURZI |
Sun Sep 24, 2006 8:32 pm |
|
I think simple rubber insulated clamps would suffice. |
|
modelac |
Mon Sep 25, 2006 5:02 am |
|
Great idea. Thank you for the reply. Do you have any idea where I might obtain these clamps? |
|
Yellermanx |
Mon Sep 25, 2006 5:28 am |
|
That is how I did mine. I also welded 1/4" bolts to the frame to hold them. Here are a couple pics. If you follow my link at the bottom there are many Berrien chassis build photos. I went to great lengths to keep rattles to a minimum. Probably over kill.
BTW you can get them at any hardware store, but the best place is a flea market, or an automotive swap meet.
Also used them to hold e-brake tubes.
|
|
modelac |
Mon Sep 25, 2006 5:39 am |
|
Thank you for the help and the photos. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|