| Erik G |
Mon Mar 17, 2003 4:36 pm |
|
| I lucked out and found a shop that will color match auto paint, and load it into spray cans, with a small minimum. I'm wanting to get OG L87 Pearl White, is it wasy for a shop to do, should I bring something in with the stock color, or should they be able to do it from the books (they carry all of the big brands, Glassurt, PPG etc) Do I just tell them what color? |
|
| rizzag |
Mon Mar 17, 2003 4:43 pm |
|
| the paint shop i go to had L87 in their computer |
|
| jbrum45 |
Mon Mar 17, 2003 5:11 pm |
|
| It cost me $40 for 4 cans of the L87 Pearl White from my local automotive paint supply store. It was a minimum type charge. I used PPG Acrylic Enamel (DELSTAR) and the rattle can paint matched the other perfectly. I spray it in the plastic lid and use a match for scratch touch-up also. Works well. |
|
| Erik G |
Mon Mar 17, 2003 6:03 pm |
|
| cool, thanx guys, I just wet sanded a bunch of primer off of my only major dent area (rear corner) I probably wont do any dent repair till I can afford to get it done right, but I might do some bondo work so It looks halfway decent for Sac-a-rama. good to hear that the Delstar matched. I will probebly end up getting it as well |
|
Powered by phpBB © 2001, 2005 phpBB Group
|