| HeadlessChicken |
Wed Mar 28, 2007 2:01 pm |
|
I looked in the search but didn't find anything :o
Will a 930 c.v. bolt right onto a boxed stock type one trailing arm?
Or am I just missing something upstairs? |
|
| takotruckin |
Wed Mar 28, 2007 2:03 pm |
|
| no, you need stub axles to accept the 930. also, it has a larger diameter, so it would probably not clear the plate used to box the arm. |
|
| HamburgerBrad |
Wed Mar 28, 2007 2:58 pm |
|
| I would have to check, but I know the type 4 CV's fit into a stock boxed arm with some room to spare. the 930 CV's are 8mm (5/16") larger in diameter. If you are going to weld the box-in kit together yourself, you could spread the plates out just a little bit more to make room for the 930 CV's |
|
Powered by phpBB © 2001, 2005 phpBB Group
|