TheSamba.com :: View topic - i want my 67 lowwwwwww, what do you guys suggest?

Tue Jul 01, 2003 1:43 am

i have a cali look teale/white 67 , it is perfect finally done, 3 inches lowered back and 2 in front , but i want it lower what do you guys suggest?

Tue Jul 01, 2003 8:07 am

you dont say what your car already has. i will assume that it has an adjustable beam. so you could try drop spindles, cut and turn beam (just like the baja guys do, but the other way...not to much), or if you dont mind being a human basketball, pull some torsion slats out (small half slats only).i dont recommend pulling slats, its just the poor boy way( i've done it for years).and dont forget your caster shims, to somewhat restore your caster as much as possible. in the rear all you have to do is reclock your spring plate on the torsion bar. just make sure you mark where its at now. just make sure you also get the right length shocks, or they'll be bottoming out all the time. good luck and happy scraping.

Fri Jul 04, 2003 11:49 pm

narrow the beam and is adjuster and drop spindles my 67 vert can sit on the ground