| 1969BlueBug |
Thu Jul 10, 2003 12:51 pm |
|
Are the oil lines on a full flow system 1/2 fittings or are they just 1/2 inch diameter and then a smaller innercore?
I want to get steel hoses for my car and do not know what size hose fittings to get for my oil and gas.
Are the oil lines 8an which is 1/2?
I have the empi full flow oil pump cover so what fittings would I need to hook up hoses to it?
Also then on my dual webber 44's what size are the fittings on there in AN?
Anyone please help me thanks....
_________________
1969 Bug
Body off resto
1914 w/ dual 44 webbers
Freeway Flyer
and some 5 spokes
website will be back up soon... |
|
| ekimthemad |
Thu Jul 10, 2003 2:11 pm |
|
My berg full flow system has 3/8 NPT fittings on the cover with 8 AN line. IN summit's catalog they list the id on the 8 AN as 7/16. I'm not sure what size fittings the empi cover would need. You can take it to a hardware store and match it up to a pipe fitting there to get the right NPT size.
I just ran AN line to my carbs and ran 6 AN. It's a bit of a pain to put together but once you get the hang of it its not to bad.
I'm not sure on what type/size fitting you will need for the webers but someone should know around here.
Mike
59 single, 69 bus |
|
Powered by phpBB © 2001, 2005 phpBB Group
|