| jdoisher |
Tue Jan 08, 2008 5:47 am |
|
For 5 x 100 who do you send them to? Looking for someone who does this on a regular basis.
Thanks
Jason |
|
| Mike Fisher |
Wed Jan 09, 2008 12:14 pm |
|
| I had mine drilled at a local machine shop for $120. Fit perfect! |
|
| 70 140 |
Thu Jan 10, 2008 8:32 am |
|
This guy did mine. Redrilled to 5x130 and installed the studs I wanted
http://www.vdubengineering.com/contact.htm |
|
| Skim |
Fri Jan 11, 2008 3:54 pm |
|
Hey Jason, Automotive Machine in downtown Ft Worth does them.
Also, with your skill and the access you already have, I know you can do them yourself with a drill press and a spare 4 lug to Porsche adapter by removing one of the Porsche studs, drilling thru the drum thru the same hole, rotating the adapter and drilling the next two because one of the 4 lug holes is in the same spot as the porsche pattern already. Just make sure you use the press in studs and not the screw in studs. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|