| shelltoes |
Thu Apr 24, 2008 11:51 am |
|
I have some old Volvo wheels i want to fit on my '60 pick-up.
They were from a P1800 which has a PCD of 4.5" the same as some Fords i believe.
Anyone sell or make adaptors to go from 5 on 205 to 5 on 4.5"?
Or any other suggestions to fit them?
I think i can fit modified Beetle drums on the rear when/if i fit a swingaxle transmission, not sure about the front though, one option is blank CSP discs to get drilled to fit but its not cheap...
Thanks! |
|
| busworks |
Thu Apr 24, 2008 12:04 pm |
|
Search the classifieds. Tipe in "adapter" and see what comes up. You should be able to find some. I recently sold two sets.
Be careful with the Volvo wheels. Every one I've seen has had a 5x110mm bolt circle. Ford is generally 5x114.3mm(4 1/2"). Hope this helps. Dan |
|
| shelltoes |
Thu Apr 24, 2008 12:34 pm |
|
Thanks! I will try to measure the PCD, i just looked up Volvo 1800 PCD on the net and it came back with 4.5" it looks about right though.
Anyone make adapters new? |
|
| busworks |
Fri Apr 25, 2008 3:29 pm |
|
You can take the wheels to any good tire/wheel shop and they should be able to measure the lug hole spacing in the wheels and tell you the bolt pattern.
I don't know of anybody making new adapters. I'm sure somebody does though. |
|
| shelltoes |
Fri May 09, 2008 3:56 am |
|
All sorted by the power of the samba!
Thanks Teeroy! |
|
Powered by phpBB © 2001, 2005 phpBB Group
|