| T-Dubya |
Tue Jul 22, 2008 6:55 pm |
|
| I finally found a stock distributor for my 69 bus Im running a 30-3 solex was wondering where to hook up the vacuum hose.[/img] |
|
| dog_jr911 |
Tue Jul 22, 2008 6:56 pm |
|
| an 035? im not sure if its a vacuume dizzy, look it up. |
|
| Randy in Maine |
Tue Jul 22, 2008 7:08 pm |
|
| Where is the vacuum can that goes on the distributor? |
|
| VSarge |
Tue Jul 22, 2008 7:10 pm |
|
Quote: Beetle 1969-1970 * 1500/1600 Manual Trans
Distributor: VW 113-905-205T, Bosch 0231 137 035 or 036
Replacement: VW 111-905-205AA, Bosch 0231 137 039
Points: 01 013
Points Replacement Plate Assy: VW 111-905-227B, Bosch 1237 110 139
Condensor: 02 007 - Note: If equipped w/AC use 02 069
Rotor: 04 033
Cap: 03 010
Parts Kit (Shims, Washers & Hardware): 059-998-211, Bosch 1237 010 007
Coil: 00 015 (Blue Coil: 00 012)
Vacuum Can: 07 024 (Replacement uses Bosch 1237 121 400)
Ignition Wires: 09 001
Spark Plug: W8AC
Timing Set At:: 0deg TDC Static or @ 800-950rpm w/strobe w/vacuum hose disconnected and plugged
Advance/Retard Range: Vacuum (Advance Only): 17-19deg @ 1.3 In. Hg, 32-35deg @ 3.2 In. Hg
Man, google works so good for this stuff.
Sarge |
|
| keifernet |
Tue Jul 22, 2008 7:10 pm |
|
Randy in Maine wrote: Where is the vacuum can that goes on the distributor?
In the picture... you can see it on the opposite side? :wink:
The hose goes to the port on the left side of the carb... |
|
| T-Dubya |
Tue Jul 22, 2008 7:16 pm |
|
|
|
| dog_jr911 |
Tue Jul 22, 2008 7:17 pm |
|
dude.
it hooks up right there on the top of that can
cmon :wink: |
|
| T-Dubya |
Tue Jul 22, 2008 7:18 pm |
|
Quote: In the picture... you can see it on the opposite side?
The hose goes to the port on the left side of the carb...
THANKS, SO YOU MEAN THE ONE NEAR THE MIXTURE SCREW |
|
| john@aircooled.net |
Tue Jul 22, 2008 8:05 pm |
|
you can't connect that distributor to the left port of the 34-3 carb. If the carb has it, connect to the REAR.
John
Aircooled.Net Inc. |
|
| keifernet |
Tue Jul 22, 2008 8:52 pm |
|
john@aircooled.net wrote: you can't connect that distributor to the left port of the 34-3 carb. If the carb has it, connect to the REAR.
John
Aircooled.Net Inc.
He says in his first post he's running a 30 pict 3?
That would be the correct distrib and carb. Left side port on the carb.
T-Dubya wrote: I finally found a stock distributor for my 69 bus Im running a 30-3 solex was wondering where to hook up the vacuum hose.[/img] |
|
| john@aircooled.net |
Wed Jul 23, 2008 6:54 pm |
|
oops!
:oops:
I somehow thought he had a 34-3
John
Aircooled.Net Inc. |
|
| T-Dubya |
Wed Jul 23, 2008 9:49 pm |
|
| Thanks, I have a 34/3 but Ive heard they are over kill for single port heads, I bumped my main jet up to a 127.5 and dropped my idle jet to 55 seems to work good but when I adjust it it dies when I screw it in like its supposed to but i can screw it out bout all the way with no change. the idle mix screw that is. wierd |
|
Powered by phpBB © 2001, 2005 phpBB Group
|