| csock |
Wed Jul 23, 2008 5:47 pm |
|
| Hey guys I am building a 1914 turbo motor I picked up a set of empi 040 castings and I am planning to change the valve seets ( spelling may be wrong) and the valves. I am wondering if anyone has used these heads on a turbo motor and if so what cam and turbo setup are you running. |
|
| miniman82 |
Wed Jul 23, 2008 6:20 pm |
|
| I'm using CB 044 CNC 42x37.5 valved heads, with CB 2241 grind cam (286* duration, .386" lift @ cam). Works quite well. |
|
| A.J.Sims |
Wed Jul 23, 2008 8:50 pm |
|
Sorry not the 040 casting but their 041 casting (GO3).
I have on a lot of 1915cc combos for street, strip, off road but what are you building and going to use your combo for? |
|
| VdanielW |
Wed Jul 23, 2008 9:11 pm |
|
| 2276 turbo with the 041 heads (AJ did them). cam is an engle 120 w/1.25:1 rockers and a garret gt33 turbo. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|