| miamijd7 |
Wed Aug 13, 2008 12:35 pm |
|
I've read the other sticky's dealing with rust removal but I am confused.
Once I get down to bare metal, if it is pitted do I use fiberglass filler to fill it first, or do I use either (Por15/rustbullet/eastwood) first then put the filler over the rust preventer. It's not clear in the threads. I'm thinking the rust preventer first then the fiberglass filler but I'm not sure. Then after the filler do I use epoxy primer than paint? Can someone elaborate on this or point me to another thread. Thanks 8-[ |
|
| wompninja |
Wed Aug 13, 2008 12:37 pm |
|
| You should ask in the body work forum |
|
| miamijd7 |
Wed Aug 13, 2008 12:45 pm |
|
| Your right, I forgot to switch forums. Moderator please delete this post, I already posted on the body work forum, sorry for the mistake. :shock: |
|
Powered by phpBB © 2001, 2005 phpBB Group
|