| Tbirdusa |
Thu Aug 14, 2008 3:03 pm |
|
Kansas City has nobody carrying Brad Penn break in oil that I can find and $7400 into this engine and figure I should take the free advice of many here and use it. Where can I order it to be shipped to me?
I got a case of 20-50 shipped to me from a shop in Wisconsin but they don't carry the break in. I'll run the 20-50 once broke in but I'm picking up that a break in oil is really what I should go with for overkills sake. |
|
| Rooy |
Thu Aug 14, 2008 3:07 pm |
|
http://www.lnengineering.com/store/catalog/bradpenn-penngrade-sae30-breakin-motor-quart-p-35.html
Did you try contacting Brad Penn to check for a local distributor?
20W-50 is kind of thick (esp. if you happen to have a larger oil pump)...lots of talk about oil weights in the oil sticky thread. |
|
| J DUB |
Thu Aug 14, 2008 3:16 pm |
|
| FYI, I started with 20-50 on a fresh build and my oil PSI was way high. I dropped to 15-40 and still too high. I now run 10-30 and all is well. Just something to keep in mind. |
|
| Tbirdusa |
Thu Aug 14, 2008 4:48 pm |
|
| Did. No response. Might get one soon but I'd like to get the engine fired. Thanks for leads. |
|
| vwracerdave |
Thu Aug 14, 2008 6:30 pm |
|
| http://www.bradpennracing.com/contact.asp |
|
| Tbirdusa |
Thu Aug 14, 2008 7:41 pm |
|
| Ordered from Charles and sent message to the BP link. Thanks guys. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|