| LSK |
Mon Sep 01, 2008 8:50 pm |
|
| Im going to be widening my new link pin front end and I was wondering if I could use the leafs out of my BJ beam for one of the sides. Anybody know if they're the same? |
|
| earthquake |
Mon Sep 01, 2008 9:22 pm |
|
LSK
no they are different, I think a L/P has 5 leaves that form a square pac and a B/J has 9 or 11 leaves. they are not interchangable that I know of.
Earthquake |
|
| oktr6r |
Mon Sep 01, 2008 9:22 pm |
|
LSK wrote: Im going to be widening my new link pin front end and I was wondering if I could use the leafs out of my BJ beam for one of the sides. Anybody know if they're the same?
You do realize the beam won't be a bolt-in swap? The distance between the tubes is different. |
|
| LSK |
Mon Sep 01, 2008 9:29 pm |
|
| I already did the link pin frame head swap and the cage is getting sent up front for more sapport as we speak. |
|
| oktr6r |
Mon Sep 01, 2008 9:40 pm |
|
| Ok, just wanted to make sure. Earthquake's right. The torsions are different. Look at pics of the weld in adjusters and you'll see the center hole is shaped different. |
|
| earthquake |
Tue Sep 02, 2008 7:15 am |
|
LSK
Sorry I got the numbers wrong, its 8 for a L/P and 10 for a B/J.
Earthquake |
|
Powered by phpBB © 2001, 2005 phpBB Group
|