| geteminline |
Sun Sep 07, 2008 6:46 pm |
|
i checked for a loose head and all seems tight.
i pulled the spark plugs and 2 3 4 seem light gray and dry with piston 2's looking less used
when i pulled 1 its still shiny like it came out of the box i am totally lost why will it spark when it out of the engine but not in the engine or how is piston 2 getting fuel and not piston 1? or how is piston one not cumbisting with it having good commpression. |
|
| Bubba 72 |
Sun Sep 07, 2008 7:12 pm |
|
| Check to make sure that the adjuster lock nuts are tight and one adjuster hasn't moved. |
|
| geteminline |
Sun Sep 07, 2008 7:41 pm |
|
| the you talking about the ones on the rocker arms? |
|
| geteminline |
Mon Sep 08, 2008 10:43 am |
|
ok heres the update i pulled of the intake and put a small amount of gas in pistont 1 and 2 and it fired right up.
so then i added a small amount to piston 1 2 3 4 and it fired perfect and sounded strong untill in ran out of gas. so then i checked the intake for any blocks and there were none. so i put new gaskets on all the intake and connected the dual port parts with new connections and started it up only to have piston 3 and 4 only working. i am stuck but making proggress to the diagnosis.
any ideas what could be going on to cause this. |
|
| Bubba 72 |
Tue Sep 09, 2008 9:20 am |
|
Recheck the valves!
Recheck the plugs! |
|
| geteminline |
Tue Sep 09, 2008 8:38 pm |
|
| thank you for all the replies i called some other buggy shops and came to the conclusion it was a vacum leak fixed and running great thanks again for the replys |
|
Powered by phpBB © 2001, 2005 phpBB Group
|