| joshuas |
Tue Sep 23, 2008 11:12 am |
|
| i'm in the process of getting my motor back together and i'm installing a 34 pict in place of an old 30/ it's a 71 super, my question ? where will the wires that connect to the cut off plug and the auto choke come from... this guy told me they just connect from the coil... that seems reasonable but i would like a second opinion... if so what do i do, splice in two wires from the black coil wire??? that seems to be what was there before, i found two cut wires duct taped to the back of the fan shroud??? |
|
| Cusser |
Tue Sep 23, 2008 11:30 am |
|
| The carb wires (one for heater element of choke and one for electromagnetic jet) attach to the positive side of the coil (the side that DOESN'T go to the distributor). If there aren't enough male terminals on the coil, you can use a 1 to 2 adapter. The back-up lights wire will also attach here. |
|
| Randy in Maine |
Tue Sep 23, 2008 11:41 am |
|
|
|
| joshuas |
Tue Sep 23, 2008 11:46 am |
|
| thanks guys/ that fixes everything/ i live in san diego cal/ should i even hook up the choke/ the 30 had a busted choke so i disengaged it/ should i do it to this one too... the card is only three months old so it breaking isn't an issue... |
|
Powered by phpBB © 2001, 2005 phpBB Group
|