| Jerry |
Mon Nov 09, 2009 4:14 pm |
|
I've searched & haven't found a solution to my problem: my low beam will not work on the driver's side. I assumed my headlight low beam was burned out, so I bought a couple of sealed beams from my FLAPS. I purchased a brighter version for my '70 model, same wattage as original. Does the high/low relay have 2 seperate wires coming out of it? I figured the relay would've just had 1 wire splitting to both headlights. What a cluster-fuck of wires I have to deal with just to remove & check that relay! I'm really dreading this, so if anyone else has some insight that would be of help, I sure would appreciate it.
Jerry |
|
| busdaddy |
Mon Nov 09, 2009 4:21 pm |
|
| Nope, just one wire for each beam, but the fuse box has a separate fuse for each light and beam, I'd check the fuses. |
|
| Jerry |
Mon Nov 09, 2009 7:40 pm |
|
Thanks BD, you nailed it. All I needed to do was to remove the fuse, clean the holder & reinstall. It must have corroded for some reason...
Thanks again,
Jerry |
|
Powered by phpBB © 2001, 2005 phpBB Group
|