| surfindo |
Wed Nov 12, 2008 4:41 am |
|
after search I still not sure what I have.
vw parts number: 056 107 065 E normally it start with 111 or 113 ??
size 74,99
anybody know what piston this for?
thanks |
|
| HeSa |
Wed Nov 12, 2008 7:17 am |
|
| Not 25hp VW. Rings should be 3+3+5 mm and the pins 20mm. |
|
| 50 Kafer |
Wed Nov 12, 2008 7:39 am |
|
| Maybe an industrial engine. |
|
| Zwitterkafer |
Wed Nov 12, 2008 11:21 am |
|
Look inside the piston for a VW stamp there. If none, these might be for another period German car, like Opel.
Are they Mahle, Kolbenschmitt (K over S logo), or something else?
Even if these are a VW size, the ring sizes may not be suitable, and the pistons might be quite a bit heavier. You could weigh one and compare to factory weight ranges given in the VW service manual.
H. |
|
| HeSa |
Wed Nov 12, 2008 12:15 pm |
|
50 Kafer wrote: Maybe an industrial engine.
25hp industrial is the same engine as 25hp car engine. Carb jets and eng nr are the only differences.
Besides Std piston sizes are 74,95, 6 and 7mm. |
|
| virtanen |
Wed Nov 12, 2008 12:19 pm |
|
| Most probably some Audi pistons for small water cooled engine. |
|
| surfindo |
Wed Nov 12, 2008 12:22 pm |
|
it come with vw box and Vw #
the piston has diferent rings but if the size ad measurement same with 25hp piston, I reckon I can use it for 25 hp engine??
i'll measure and check the weight ASAP
thanks
|
|
| HeSa |
Wed Nov 12, 2008 12:29 pm |
|
surfindo wrote: it come with vw box and Vw #
the piston has diferent rings but if the size ad measurement same with 25hp piston, I reckon I can use it for 25 hp engine??
i'll measure and check the weight ASAP
thanks
Save the trouble and measure the piston pin diameter. Those look like 22mm and if such they will not fit.
Also the distance from the top of the piston to the pin looks different than in 25hp pistons. I think your's are the same as in this ad. Just a bit dustier.
http://www.thesamba.com/vw/classifieds/detail.php?id=599615
Some ukn watercooled pistons. |
|
| virtanen |
Wed Nov 12, 2008 12:33 pm |
|
| VW/Audi 1.3 water cooled engine in 1980s. |
|
| HeSa |
Wed Nov 12, 2008 12:36 pm |
|
virtanen wrote: VW/Audi 1.3 water cooled engine in 1980s.
Need a set Mika? |
|
| surfindo |
Wed Nov 12, 2008 12:37 pm |
|
| OK thanks, I"ll measure the pin diameter. 9 years in to vw hoby few times I came across few mysterious parts. |
|
| surfindo |
Wed Nov 12, 2008 12:39 pm |
|
virtanen wrote: VW/Audi 1.3 water cooled engine in 1980s.
do you have more details what vw/audi engine they from? |
|
| surfindo |
Wed Nov 12, 2008 1:24 pm |
|
after do google search its probably Motor this what i found:
Fabrikant Volkswagen
Type S-4
SOHC
8 Totale kleppen
2 kleppen per cilinder
Aantal nokkenas lagers 5
Constructie
Boring × Slag 75.00mm × 59.00mm
so they probably from early water cooled vw some golf/polo come with 75'piston |
|
Powered by phpBB © 2001, 2005 phpBB Group
|