| houser31 |
Tue Apr 28, 2009 7:35 pm |
|
work in progress...
|
|
| runslikeapenguin |
Tue Apr 28, 2009 11:51 pm |
|
| are those car seats for big kids? :lol: |
|
| vaderoni |
Wed Apr 29, 2009 10:12 am |
|
| What are they out of? Very interesting :wink: |
|
| houser31 |
Wed Apr 29, 2009 10:33 am |
|
| those are child booster seats... i built brackets for them and put them in... my kids are 7 and 5 and fit perfectly in them with room to grow |
|
| HitIt |
Fri May 01, 2009 3:31 pm |
|
| You just qaulified for Father Of The Year as far as I'm concerned. |
|
| Lotrat |
Fri May 01, 2009 3:52 pm |
|
Put the booster in the front so he can drive...
|
|
| 11CAB |
Fri May 01, 2009 4:41 pm |
|
Lotrat wrote: Put the booster in the front so he can drive...
Geez Lotrat.... I thought you were older than that......... :P |
|
| Bajabro |
Fri May 01, 2009 4:42 pm |
|
Lotrat wrote: Put the booster in the front so he can drive...
Arent you soupposed to encourage your kids to go faster. :lol: |
|
| houser31 |
Fri May 01, 2009 6:50 pm |
|
HitIt wrote: You just qaulified for Father Of The Year as far as I'm concerned.
is that a hint of sarcasm? |
|
| KrAzY-BaJa |
Sun May 03, 2009 9:43 pm |
|
| go faster!!!!!!!!!!!! hahaha i no he was beggin for more :lol: |
|
| houser31 |
Thu May 21, 2009 12:22 pm |
|
here are a few pics... the roll bar going over the kids seats... the placement for the fuel tank... and the anchor for the kids safety belts...
|
|
| 69_67VWBug |
Thu May 21, 2009 2:06 pm |
|
| i think our bugs are the same og color. mines a 70 also |
|
| houser31 |
Tue May 26, 2009 3:30 pm |
|
| i'm trying to get my trailing arms off and cant seem to get the bolt all the way out... it seems to be just spinning in the same place when i turn it... anybody have any suggestions? |
|
| HamburgerBrad |
Tue May 26, 2009 3:31 pm |
|
| at that point, the arm wants to fall down. lift the arm up and take the load off the bolt, pull it out. |
|
| houser31 |
Wed May 27, 2009 8:52 am |
|
this is the bolt i cant get out... and the bumper installed... |
|
| xirxious |
Wed May 27, 2009 11:34 am |
|
| Is that bumper welded to the shock tower? I'd like to add the dual front bumper to match the rear, but for now would want a bolt on as I'll change the beam later. I'm guessing they sell bolt on versions of the front bumper... |
|
| HamburgerBrad |
Wed May 27, 2009 12:20 pm |
|
xirxious wrote: Is that bumper welded to the shock tower? I'd like to add the dual front bumper to match the rear, but for now would want a bolt on as I'll change the beam later. I'm guessing they sell bolt on versions of the front bumper...
the bolt on version consists of welding a small plate to the beam for the upper mount. |
|
| houser31 |
Wed May 27, 2009 2:42 pm |
|
| HAMBRAD is right... you weld on a small tab and then bolt the bumper to it.. |
|
| houser31 |
Wed Jun 10, 2009 9:51 pm |
|
after about 4 hours of fighting this thing.. i got it off finally...
had to cut it out and reweld the loop back in...
i tried to get pictures of it and hopefully you can see the inside metal thing for the rubber busshing was ceased on the bolt....
i got the master cylinder in place and thinking this is my placement for the turning brake...
|
|
| houser31 |
Wed Jun 10, 2009 9:53 pm |
|
| also was wondering if i wanted to put 3x3s on this baja with a stock type 1 transmission... how long of axles will i need? |
|
Powered by phpBB © 2001, 2005 phpBB Group
|