| eastky_vw |
Mon Nov 02, 2009 8:42 am |
|
I have a 72 super, I removed the drums to do a brake job and found that my wheel bearing seals are leaking a little and I want to replace them. I want to order the correct parts, I am having trouble locating exactly what I need. Is this what I need.. ?
http://www.bughaus.com/Axle_Seal_Kit_-_311598051A.htm
It isnt listed for the 72 super.. but if you go here then it says it is what I need....
http://www2.cip1.com/ProductDetails.asp?ProductCode=VWC-311-598-051
Any help would be appreciated. I just want to get the correct parts.
Thanks,
Steve |
|
| mjenner |
Mon Nov 02, 2009 9:17 am |
|
| Just pulled mine apart last month - that first pic is all you need - simple repair once you get into it. |
|
| eastky_vw |
Mon Nov 02, 2009 9:23 am |
|
| Thanks.. I was wondering why it didnt have the super listed.. made me concerned it wasn't the correct part. |
|
| eastky_vw |
Mon Nov 02, 2009 2:11 pm |
|
Do I need two seals since I have IRS? Or will just the kit from Bughaus do what I need? Any help would be appreciated, sorry I am new to this. I watched the bug me video and I suppose the steps to replace this is the same as this link...
www.vw-resource.com/rear_seal.html
Steve |
|
| donivan_p |
Mon Nov 02, 2009 2:32 pm |
|
| Just did mine on my 71 standard. irs has two seals. the one in that bearing cover that is pictured and one that goes on the cv axle side of the stub axle. so if the backside is not leaking. just do the seal in that bearing cover. german seals are way better btw |
|
| Viande |
Mon Nov 02, 2009 3:28 pm |
|
| Seals are 113 501 315 G x2 per axle and the ring is 113 501 291 B x1 per axle. Good luck |
|
Powered by phpBB © 2001, 2005 phpBB Group
|