TheSamba.com :: View topic

Tue Nov 03, 2009 8:46 pm

did a search in the classifieds but nothing, anyone know where i can get a dual carb linkage like this? ive got a 1700 T-4 and just picked up a set of solex 32 pdsit but no linkage...thanks!

Tue Nov 03, 2009 8:59 pm

That's the piece of shit CB performance aftermarket crap! you don't want that. The ball joints fall off like butter!

Google CB performance and 34 if you want that.

Yes I have some in storage...major SUCK!

Wed Nov 04, 2009 10:13 am

Could Kadron linkage for a T4 be adapted to work?

Wed Nov 04, 2009 10:24 am

I had trouble buying new ones from VW 20 years ago. There are some generic ones at McMaster-Carr which might work.

http://www.mcmaster.com/#rod-end-linkages/=4cwvzm

Wed Nov 04, 2009 11:01 am

Ok....I didn't read your OP well enough. :oops:

CB does make some decent crossbar linkage kits, but the one in that pic AVOID!

http://www.cbperformance.com/category.asp?CategoryID=6

Wed Nov 04, 2009 8:27 pm

alright so i called cb and scat and they both said their products arnt adaptable to the 32pdsit carbs.... ive looked in the classifieds for a stock linkage but to get the linkage you have to buy the carbs too no that big of an issue but i figured i'd see if anyone has any other suggestions first...

Wed Nov 04, 2009 8:47 pm

did you look at http://summitracing.com

or gene berg

http://www.geneberg.com (you have to search for it but linkages are there)

Wed Nov 04, 2009 8:55 pm

lowbay wrote: ive looked in the classifieds for a stock linkage but to get the linkage you have to buy the carbs too no that big of an issue but i figured i'd see if anyone has any other suggestions first...

The 32's weren't stock....OG had a 34pdsit-2 on the port side and a 34pdsit-3 on the starboard.

Post some pics cowboy...

Thu Nov 05, 2009 8:08 am

Try A.J. Sims at http://www.lowbugget.com/

Thu Nov 05, 2009 8:00 pm

i know there not stock but ive also talked to a few guys running them on a t2 and they have no complaints they came on the type3 motors, ive also checked out the sites you guys suggested and the linkages are nice but i only payed $40 for the carbs+manifolds, hoping to find a deal on linkages too

Thu Nov 05, 2009 8:20 pm

i think the csp linkage for type 4 w/ porsche shroud will work. but it isn't exactly the cheapest one available. the csp bellcrank linkages are super-good however, better designed and made than anything else on the market.