| dirigible |
Tue Jan 19, 2010 5:15 pm |
|
Quick question:
Is the outside edge of the center hole in the pulley supposed to be perfectly flush with crankshaft before I put the bolt in?
Mine's about 1/8" out and doesn't want to go any further.
Thanks. |
|
| busdaddy |
Tue Jan 19, 2010 5:17 pm |
|
| That's good, it bottoms against the cam gear and slinger, a gap is normal, no gap would be bad. |
|
| babysnakes |
Tue Jan 19, 2010 5:18 pm |
|
| Sounds about right. I don't know the distance, but it's not flush. |
|
| dirigible |
Tue Jan 19, 2010 5:18 pm |
|
| Cool. That's what I wanted to hear. |
|
| Desertbusman |
Tue Jan 19, 2010 9:47 pm |
|
| If it was flush or further in the bolt wouldn't tighten against it. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|