| Karzapart55 |
Thu Feb 11, 2010 3:31 pm |
|
| I have some Jetta wheels, not sure what year, was thinking of putting them on my 72 Bus. They fit on with out the center cap. Can i cut the flange on the center cap to reinstall it? I tried a couple searces, no answers. Thanks |
|
| Karzapart55 |
Sat Feb 13, 2010 8:01 am |
|
| Need help, I have some VW rims, 7JX16H2. I believe these are Jetta. they fit on the front of my 72 Bus with out the grease cap. can i run without the cap, just using the center cap with the VW logo that came with the wheels? I have tried a few searches, but unable to find the answer. Also need to know what size tires they will accept. By the way, dont know jack about tires Thanks |
|
| Mike Fisher |
Sat Feb 13, 2010 1:56 pm |
|
| They should be fine without the grease caps, but with the VW logo caps. They will throw a little grease inside the wheel hub, but that's a "small price to pay" to make them fit! Check them every time you change your oil, but I doubt they'll need much grease? |
|
| eurojunkman |
Mon Feb 15, 2010 2:04 am |
|
| The bolt pattern is different. Close but different. The jetta wheels are 5 x 100 while the bus is 5 x 112. The wheels are not a direct bolt on and will come loose. Do not mount these. |
|
| ubercrap |
Mon Feb 15, 2010 8:01 am |
|
| Wrong- Mark V and up watercooleds are 5x112. He may or may not have some of those- without pictures or part numbers, we don't know which wheels he has. |
|
| eurojunkman |
Sat Feb 20, 2010 12:12 pm |
|
| Wrong- Yes Mk5 wheels are 5 x 112. But bay windows have a 5 x 112.5. Did not know that I had to specify the exact number. The only car to my knowledge that has the same bolt pattern is Vanagon or Mercedes Benz. |
|
| Vince79 |
Sun Feb 21, 2010 6:11 pm |
|
It fit but the front wheels need to be machined and the rear cannot have centered cap
I did a test last summer, in front I remove the grease cap
|
|
| mattcuddy |
Mon Feb 22, 2010 9:30 am |
|
eurojunkman wrote: But bay windows have a 5 x 112.5.
Where did you get the 112.5 number from? |
|
| Karzapart55 |
Wed Feb 24, 2010 9:35 am |
|
| Thanks for the info. The only prob now is 1 of the 4 Jetta rims is n.g. Icould try to find one. Some guy here has 4 Euro Van rims, he says are 5X112. Anyone running these on their late Bay? |
|
| Vince79 |
Thu Feb 25, 2010 3:50 pm |
|
Eurovan fit on the Bay
5x112 are available on some Audi, some Mercedes, VW Transporter 68-79, Vanagon 1980-1992, Eurovan/Transpoter 1993-200?, Vw Passat 1997-2010, Jetta and Golf Rabbit MK5 2005-2009 and new MK6 Golf Rabiit, Jetta 2010.
The only thing is, with Audi and Mercedes and VW Passat, Golf/Rabbit and Jetta MK5 and MK6, you need to machine the center hole to fit the hub. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|