| 52panelvan |
Mon Feb 15, 2010 2:09 pm |
|
Hi,
Does anyone know where you get these, they are on every wiring loom end on early looms and possibly/probably later ones too. They are crimped and soldered .
I can't imagine they are not available but just cant seem to find them.
Any help would be great
Cheers
Mark |
|
| BeaterBarndoor |
Mon Feb 15, 2010 6:43 pm |
|
they are called ferrules. should be able to get them through any type electical supply. i got a handful of different sizes through www.mcmaster.com
here is the page link,scroll down a bit and you will see.
http://www.mcmaster.com/ctlg/DisplCtlgPage.aspx?Re...oolsetAct= |
|
| barndoormambo |
Tue Feb 16, 2010 4:37 am |
|
| ..off to Maplins, then , Mark! :wink: :D |
|
| 52panelvan |
Tue Feb 16, 2010 5:04 am |
|
Many Thanks for that - i guess just not knowing the name of them was the sticking point.
I can finish the loom off now properly.
Yeh Tim, i was fitting the rear lights i restored that came via your good self and remembered all the ends were still not done as they should be on the wiring loom. I looked before when making it but had drawn a blank - was then added to the post Hessish fix list :) |
|
| BeaterBarndoor |
Tue Feb 16, 2010 8:25 am |
|
it has been a while since ive taken a look at an original barndoor harness, but i am curious if the ends on your old harness,running to all of its parts, had the ferrules?
i have in my mind that they were only used going into the fuse blocks, and maybe the semaphores also but i cant picture anything else getting them.
all other connections i am picturing just solder dipped.
im pretty sure this is the way post BD is, maybe earlier bd used them throughout? just curious |
|
Powered by phpBB © 2001, 2005 phpBB Group
|