| kmmcdonald |
Wed Feb 24, 2010 5:17 pm |
|
Any experience with the window molding (an aluminum insert) qhality from this company:
http://www.wolfsburgwest.com/wolfsburg_new/Body_misc/bus_window_rubber.cfm
thanks
Keith |
|
| Anchovy |
Wed Feb 24, 2010 5:21 pm |
|
The quality is very good. There are plenty of threads on how to install the rubber with the aluminum trim. The trick is to put the rubber on the window, install the aluminum and then install it all as a unit.
I used the WW reproduction on my old '71. |
|
| ytsuji |
Wed Feb 24, 2010 5:34 pm |
|
The quality is very good. I finished mine last Dec. It require a lot of patience , window cleaner as lublicant, a hook(Idon't know how to call it) and finger power. There are a lot of Samba advices which are very helpfull.
Make sure the orientation of the strait crip so that does not rotait.
Good luck!! |
|
| Vwman55 |
Wed Feb 24, 2010 5:42 pm |
|
Look toward end of thread.
http://www.thesamba.com/vw/forum/viewtopic.php?t=326473&postdays=0&postorder=asc&start=0
I used Wolfsburg West, had no problem with it. |
|
| chabanais |
Sun May 02, 2010 7:47 pm |
|
| Great post I couldn't figure it out until I saw this now I'll try again thanks! |
|
Powered by phpBB © 2001, 2005 phpBB Group
|