| jason |
Sat Nov 16, 2002 6:48 pm |
|
| I was wondering if anyone has a picture of the frame rail on the inside, with the belly pans removed?? I am trying to figure out how the wiring harness is routed. |
|
| highdesertdeluxe |
Sun Nov 17, 2002 10:04 am |
|
jay,
on my 59, the frame rail is a channel with web facing out. my harness routes through a conduit (approx 1/2"dia.) attached o the inside face of the channel web. my right belly pan is removed, anyone got a spare?, but i still can't see this conduit. i was able to see the front of the conduit from a rust hole just behind the front right wheel arch. hope this helps. -mark |
|
| highdesertdeluxe |
Sun Dec 29, 2002 11:07 am |
|
| jay, sorry for ythe lapse, been out in the garage for months it seems. the conduit is in the middle from what i can tell, but you can drill carefully through the web of the channel &stop when the drill starts going thru the other side. good luck. ps if your replacing your cargo floor you can see it better. -mark |
|
Powered by phpBB © 2001, 2005 phpBB Group
|