TheSamba.com :: View topic

Sun Dec 01, 2002 7:00 pm

What is the material the cab divider is made of? Is it Masonite?, or a similar material? Does anyone have the dimensions of the window placement, and the vertical strap placement? I have one in my panel, but I don't know if it is original and has been cut by the PO to recieve speakers and a larger window opening (dumbass). Anyway- I would like to fabricate my own- until I can find an original.

Wed Dec 04, 2002 4:09 pm

Does anyone have any info?

Wed Dec 04, 2002 4:21 pm

i have an original at work, i can look for you tomorrow if nobody has answered it by then.

Wed Dec 04, 2002 4:57 pm

jeff-

thanks- i also have a ? for u re: Orrs DD panel- does that have a narrowed frnt beam? if so, how much? Im probably getting WAY ahead of myself, but I need to dream.

ps...can't convince my wife that Santa needs to bring me those dropped spindles of urs..maybe soon after the new year(fingers-crossed)

Thu Dec 05, 2002 3:25 pm

ok paul, the window opening is 7 1/4 by 19 5/8. the window is 5 1/4 down from the fresh air vent and 10 1/8 up from the bottom. also the support bars are flush with the bottom of the divider but stop a 1/2 inch from the top of it and they are also 1/2 inch out from the window opening on each side.
hope this helps
jeff

Thu Dec 05, 2002 4:24 pm

jeff-

yes thanks- is it made from masonite? mine is - which is if it is the orginal material -than i can use my cut-up one as a pattern. you wouldn't happen to have those straps would you?

paul

Thu Dec 05, 2002 4:29 pm

sorry, the ones i have are on a nice original divider. i have no leads on any seperate support bars.

Thu Dec 05, 2002 4:32 pm

wanna sell it?

Thu Dec 05, 2002 4:34 pm

ya maybe, i dont have a panel and dont plan to have one any time soon. not too sure what the going rate is, and it would be a pain to ship.

Thu Dec 05, 2002 4:44 pm

ive seen them anywhere from $100- $150- im in indianapolis, in 46236, it could probably be shipped ups-fedex ground in a flat box? so i honestly don't know- ur call

Mon Dec 09, 2002 9:52 am

guess not.........well if anyone has one.....let me know.

Wed Dec 18, 2002 7:06 pm

The original i have is made of a grayish masonite, It is pretty much like heavy duty but brittle cardboard, i wish i had some glass for it though.

Wed Dec 18, 2002 7:09 pm

lol............hey mike-according to Bryan aka Bigshortsbry@aol.com its in the mail........what an A$$..

yah gonna sell me your Jeff?

Wed Dec 18, 2002 7:13 pm

yes sir, i made a box for it today, just need to find out about shipping cost

Sun Dec 22, 2002 2:38 pm

Thanks much Jeff....Have a great holiday season.