| JoshB |
Sat Feb 22, 2003 1:01 am |
|
Im welding in the rear wheel arches on my 64 can somebody tell me the distance from the bottom of the belt line to the bottom edge of the wheel arch or tell me where I could find this info on the web
thanks for your time,JoshB |
|
| j.pickens |
Sat Feb 22, 2003 9:10 am |
|
JoshB
I have a '64, and am going over to the garage today. I'll take some measurements and post them tonight. Do you need front/rear locating dimensions as well? |
|
| john walker's workshop |
Sat Feb 22, 2003 10:23 am |
|
| my 64 is 24.875" from the bottom crease of the beltline. |
|
| JoshB |
Sat Feb 22, 2003 3:05 pm |
|
yes front/rear would be good too. With all the work I should get all the measurements I can
Thanks
JoshB |
|
| j.pickens |
Sat Feb 22, 2003 5:39 pm |
|
My rear arches measure 24+15/16", a scooch more than jwworkshop measured. I guess you could call it + or - 1/16"
As far as front/rear, since the surfaces are curved, it is hard to get a reference point.
If it's real important, I'm sure we could figure something out. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|