| ekacpuc |
Thu Apr 12, 2012 9:31 pm |
|
Anyone happen to know what the 040 mofocos cc out to when bored to 90.5mm?
Anyone know how thick the step is?
Greg |
|
| mark tucker |
Fri Apr 13, 2012 7:45 am |
|
| contact roy,he should know.I opened a step up about 2 months ago but cant remember the total depth.I only went down .040 for pistons at at zero deck for clearance on a larger bore. |
|
| ekacpuc |
Fri Apr 13, 2012 12:42 pm |
|
he got ahold of me, sounded to good to be true (54cc 90.5 bore)..
Greg |
|
| mark tucker |
Fri Apr 13, 2012 1:57 pm |
|
| if you bore it right down to where it is now it dont change the cc.go any farther it does.you may want to unshroud the valves &take off any sharp edges while your there.if possiable pull the valves and do some mild pocket porting&raidi the exhause port short side raidi to keep hot spots down& flow a little better. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|