| paul_fio |
Wed May 09, 2012 10:29 pm |
|
| I've connected up my new blinker relay (9 pin) in my 67 squareback and only the right turn indicator on my gauge turns on when either the left or right turn signals turn on. There's only 1 blue green wire that connects to the blinker indicators and all other wiring looks correct. Any ideas what might be wrong? |
|
| Tram |
Wed May 09, 2012 10:35 pm |
|
paul_fio wrote: I've connected up my new blinker relay (9 pin) in my 67 squareback and only the right turn indicator on my gauge turns on when either the left or right turn signals turn on. There's only 1 blue green wire that connects to the blinker indicators and all other wiring looks correct. Any ideas what might be wrong?
Bulb out. |
|
| paul_fio |
Wed May 09, 2012 11:37 pm |
|
| Ah, very good. Thanks. |
|
| paul_fio |
Thu May 10, 2012 9:37 am |
|
| I didn't realize this, but do both dash arrows flash when either the left or right signals are turned on? I was thinking that since there are arrows, only one side or the other will flash depending on the direction though looking at the schematic, it appears that both should turn on when either the left or right signals are on. |
|
| Mike Fisher |
Thu May 10, 2012 9:47 am |
|
| Yes unfortunately. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|