| fatpaulie |
Sun May 13, 2012 6:09 pm |
|
| i need to replace the stud thats in the case that holds the oil cooled on. my problem is the case i have had the none doghouse stud, my cooler is the dog house cooler, how do you get the stud out and where would i get a new and right size stud, and how do they go in? |
|
| joe56vw |
Sun May 13, 2012 7:27 pm |
|
You should be able tobget the stud at any fastners store
You could also get a stud install and removal tool for it Or you can use the double nut trick |
|
| sixfootdan |
Sun May 13, 2012 7:29 pm |
|
| Double nut the stud and put the wrench on the lower one to remove. Ace hardware carries metric stuff i've seen metric all thread too. |
|
| fatpaulie |
Sun May 13, 2012 7:31 pm |
|
| hey thanks ill try that double nut thing. |
|
| VeeDubDoug |
Mon May 14, 2012 8:38 am |
|
Heres the stud you will need if you don't want to retap the hole.
6mm-8mm oil cooler stud |
|
| Low67vdubinnocal |
Mon May 14, 2012 1:12 pm |
|
| I got my step stud at the local napa auto parts. like .39 cents. If you have a napa its a stocked item. |
|
| fatpaulie |
Mon May 14, 2012 3:01 pm |
|
| cool thanks for all the help. :lol: |
|
Powered by phpBB © 2001, 2005 phpBB Group
|