| david9 |
Mon Jul 09, 2012 6:31 pm |
|
| Does anyone have a pair of 3 inch per side swingaxle axles they are wanting to get rid of? This would be a total of 6 inches all together. Does anyone know of anyone that might have a used set laying around? I am needing them for a street car so used is perfectly fine. |
|
| [email protected] |
Mon Jul 09, 2012 8:21 pm |
|
| Your least expensive route would probably be getting a new set from EMPI. Anyone that has a set of American made Sway-A-Ways is hording them as if their life depended on it, and if you are able to pry them from their fingers, you'd probably end up spending quite a bit more on the used ones than you would the new EMPI ones. The EMPI part # is 16-2237. |
|
| david9 |
Wed Jul 18, 2012 3:10 pm |
|
| Ive seen those as well but there pretty darn expensive also. I have found a few used sets that people are willing to come off of but now that I am wanting to purchase I cant find any. |
|
| slalombuggy |
Wed Jul 18, 2012 4:58 pm |
|
The Empi ones are cheap and will support a lot of HP. If you want expensive try Karpiola or Mark Williams Engineering $1500+ a set.
brad |
|
| david9 |
Wed Jul 18, 2012 5:52 pm |
|
| WOW!! Yeah so I guess the EMPI ones are cheaper. I put a wanted ad up in teh Classifieds just to see if there was anything out there and I got a couple emails back with some old SAW ones for 400-450 shipped to my door. Thats kind of what I am looking for. I will keep my eye out and see what I can come up with. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|