vwracerdave |
Wed Jul 10, 2013 7:22 pm |
|
I'm needing a complete airbrush kit for some hobby work I'm doing. What's a good kit to get. If there is a sticky or any good threads please direct me their.
Thanks. |
|
skills@eurocarsplus |
Wed Jul 10, 2013 7:45 pm |
|
i have this one
http://www.matcotools.com/catalog/product/MABCR3/PROFESSIONAL-AIR-BRUSH-03MM/
very pleased with it |
|
runchman |
Wed Jul 10, 2013 8:40 pm |
|
There are a lot to browse thru and info to read on the tcpglobal airbrushdepot subsection:
http://www.tcpglobal.com/airbrushdepot/abchoose.aspx |
|
MMW |
Thu Jul 11, 2013 3:39 am |
|
Try these guys.
http://www.ultima-airbrush.com/ |
|
Lidpainter |
Thu Jul 11, 2013 5:54 am |
|
I've got a small airbrush compressor that I used once or twice. It's dirty from sitting around but it works great. PM me if interested. Also, if you are looking for a quality multi-purpose airbrush that isn't too expensive, look into the Iwata Eclipse series of brushes. Try www.coastairbrush.com or www.bearair.com for some decent deals. |
|
djway3474 |
Thu Jul 11, 2013 10:52 am |
|
I like the pasche dual action. the reason is that it is all metal internally. no little seals to go bad then start spitting on me. you can set it to act like a dual or single action brush.
harbor freight has a copy of a very nice brush that is only twenty bucks on sale. I have pulled one apart and it is made very well. |
|
mlhsquared |
Thu Jul 11, 2013 4:44 pm |
|
Lidpainter wrote: Look into the Iwata Eclipse series of brushes. Try www.coastairbrush.com or www.bearair.com for some decent deals.
X2 on the Iwata Eclipse. A great all around airbrush. I run my ABs off my shop compressor, with a small regulator and a moisture filter in line. |
|
vwracerdave |
Sun Jul 14, 2013 5:49 pm |
|
runchman wrote: There are a lot to browse thru and info to read on the tcpglobal airbrushdepot subsection:
http://www.tcpglobal.com/airbrushdepot/abchoose.aspx
Thanks a lot. After browsing thru here and the local hobby store I think I'm gonna get a Badger 150. |
|
eshan2 |
Sun Jul 14, 2013 6:01 pm |
|
Have you looked at Coast Airbrush? They have the best pricing on IWATAS of any body and they use what they sell.I have an Aztek, Old Paasche H and a Paasche VL set.I had an Iwata HP-CS 2 weeks after using one the first time. I have never looked back. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|