| Audibl3xAng3l |
Sat Nov 22, 2003 8:23 pm |
|
| I HAVE A 67 SQUAREBACK AND AM NEEDING TO RAISE THE REAR END. WHEN I BOUGHT THE CAR THE REAR WAS ALOT LOWER THAN THE FRONT, SO I WANT IT EVENED OUT. IF ANYONE HAS ANY INFORMATION ON HOW TO RAISE THE REAR END OF A 67 SQUARE, IW OULD APPRECIATE IT! THANKS!! |
|
| tripicana |
Sat Nov 22, 2003 8:37 pm |
|
| just look at all the posts on lowering a type 3, bugs are the same also, and move the trailing arm the oposite way. you'll probably only want to move one or two splines down. i've helped raise my friends baja and the hardest part was realigning the bushing cover because you put more tension on the arm when you raise it. my car was like yours when i got it, rear end was sagging. instead of raising the rear, it was easier to lower the front to match. |
|
| Bobnotch |
Sun Nov 23, 2003 7:26 am |
|
Check out this thread;
http://www.thesamba.com/vw/forum/viewtopic.php?t=51814&sid=2abe00684be21d460bce9fa0192ee14a
It covers lowering, but all you have to do is opposite when it comes to the trailing arms. I hope this helps. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|