bderewic |
Thu Oct 31, 2013 10:17 pm |
|
Im thinking it would be fun for a little to stance out my notchback and Im curious if I could run the off road dish rims 15x6" up front with 155/60 and 15x8" in back with 185/60, Im sure I would have to run a narrowed beam up front but I'm wondering if the back will fit, my notch is slammed 2/3, but seems lower.
What do you guys think?
Rims
http://www.ebay.com/itm/Volkswagen-Wheels-4x130-Bl...1343669725
my notch is beat, the pan is soo gone, I have an extra pan and eventually im gonna restore it purist style but in the mean time I'm thinking of having some fun and toying around with the stance look |
|
bderewic |
Thu Oct 31, 2013 10:47 pm |
|
Upon drawing the stock and dish rims sizes and offsets in google sketchup i dont think 8" will fit on the back, the rims stick out an extra 2 1/6" :shock:, so I would have to narrow the rear 4" to get 8" rims to fit :( haha |
|
Nate M. |
Thu Oct 31, 2013 10:51 pm |
|
I'm gonna have to say no. Make that hell no! :lol:
This is what 17X8" 50ET Boxter wheels with 235/50/17 tires on early Porsche 944 arms with the factory spacer (you'd need to flare about 2"+ to make this happen:
Same wheels w/o factory spacer (the inner sidewall is dangerously close to the spring plate and you'd still need to flare at least 1" or more):
|
|
bderewic |
Thu Oct 31, 2013 11:25 pm |
|
Those boxer tires are 2.5" taller and 2" wider than mine...
I did find this thread though...
http://www.thesamba.com/vw/forum/viewtopic.php?t=529611&highlight=rims
there is a car half way down running a bbs rim 15x8 et20 with 185-55 15's. and it seems to work, the wheels I wanna get list a 37.5mm offset (im assuming this is et37) which would put them under the car a little more? but i am slammed soooo... maybe i should try thinking about 7" rims |
|
2slow |
Fri Nov 01, 2013 3:46 am |
|
I got 7.5x16 and 8x16 on my squareback! Not sure about et
tyres are 175/50-16 and 195/55-16
|
|
bderewic |
Fri Nov 01, 2013 7:49 am |
|
2slow wrote: I got 7.5x16 and 8x16 on my squareback! Not sure about et
tyres are 175/50-16 and 195/55-16
Man that looks good!
Can you find out the ET? Is your front end narrowed at all? How many clicks are you dropped? |
|
2slow |
Sat Nov 02, 2013 12:44 am |
|
Thanks! Its 3 piece custom made rims! so I have to measure to find ET
I am soon going to take off the wheels, so can try and measure it then!
Stock front end, its lowered 3 outer clicks in the front and 2 in the rear!
This is how it sits in the rear! there is enough clearance! Lips are rolled! ;)
|
|
fuhq64 |
Wed Nov 06, 2013 10:55 pm |
|
I'm running 15x7 et0 with a 165 tire on the rear of my Squareback. I did do a little fender pulling but it's not super obvious. 8 inches will fit with the right offset & ride height |
|
vegasquare |
Fri Nov 08, 2013 8:10 am |
|
Rear 17x8 et35 205/40-17 stock long axles and pulled fenders
|
|
2slow |
Fri Nov 08, 2013 11:21 am |
|
I measured the backspacing of the wheels today! And it was 5,67 inches!
So I put that in a backspacing to offset calculator
- 7,5x16" wheels are et36
- 8x16" wheels are et 30 |
|
seth1212 |
Sun Jan 12, 2014 7:35 pm |
|
vegasquare wrote: Rear 17x8 et35 205/40-17 stock long axles and pulled fenders
can you say bad ass I have the twin to this car just its stock id love to make it look like yours. |
|
fuhq64 |
Mon Jan 13, 2014 11:55 pm |
|
vegasquare wrote: Rear 17x8 et35 205/40-17 stock long axles and pulled fenders
That's some good lookin fitment 8) |
|
bderewic |
Tue Feb 18, 2014 2:16 pm |
|
vegasquare wrote: Rear 17x8 et35 205/40-17 stock long axles and pulled fenders
That fitment and stance is on time!! Looking to do this to my notch, i was thinkin i would have to narrow the rear end but idk now, its working with a little fender pull.
What Wheel and Tire specs are on the front?
Car is sick |
|
Powered by phpBB © 2001, 2005 phpBB Group
|